Powermatic PM1200 Air Filtration System, 1/4HP, 1PH, 115V 1791330
Powermatic PM1200 Air Filtration System, 1/4HP, 1PH, 115V 1791330
Low stock
Couldn't load pickup availability
Details
Details
Powermatic 1791330 PM1200 Air Filtration System (Woodworking)
Your shop may look clean, but how clean is the air? The PM1200 Air Filtration System traps up to 99% of all 5-micron particles and 85% of all 1-micron particles for a healthier work environment. Three blower speeds modify air flow. The unit can be operated either at the cabinet or with the remote transmitter which uses radio-frequency, eliminating the need for line-of-sight operation. The timer has nine settings, allowing continuous operation for up to 9 hours while you’re away, and will shut off at the end of that period. The filter guards can be removed and installed without tools, for instant filter access.
Features:
- Two-filter system traps particles as small as 1 micron
- Remote control operates on radio frequency for wider range of effectiveness
- Timer has nine settings, for up to nine hours of continuous operation
- Inner filter has fine mesh pockets for high efficiency, can be blown clean
- Electrostatic outer filter is disposable
- Diffusion filter disperses exhausted air
- Four eye bolts allow suspension from shop ceiling
- Indicator lights up after 200 hours to remind user to replace filters
- Three blower speeds to modify air flow
- Filter guards install and remove easily without tools for quick access to filters
- Two carry handles for portability
- Fully enclosed motor has overload protection for long service life
Specifications:
- Inner Filter Efficiency (%) 85
- Speeds 547, 706, 1,196
- Timer Settings 1/9/2012
- Motor Power (HP) 1/4
- Motor Phase 1
- Motor Voltage (V.) 115
- Motor Current (Amps) 3-1/2
Warranty and Service:
Walter Meier (Manufacturing) Inc. warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier (Manufacturing) Inc. Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.
Powermatic 5-year Warranty:
POWERMATIC products carry a limited warranty which varies in duration based upon the product. This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage. The warranty covers only the initial purchaser of the product.
Specifications
Specifications
| Powermatic PM1200 Air Filtration System, 1/4HP, 1PH, 115V 1791330 | |
| AIR FILTRATION | 5 Microns |
| APPLICATION | Wood Working / Metal Working |
| Brand | Powermatic |
| HEIGHT | 13 in |
| HORSEPOWER | 0.25 HP |
| LENGTH | 33 in |
| POWER SOURCE | Electric - Corded |
| PRODUCT TYPE | Tools/Machinery |
| TOOL SUB-TYPE | Dust Management - Dust Filtration |
| TOOL TYPE | Dust Management |
| VOLTAGE | 110V-120V |
| WIDTH | 25 in |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Custom add to cart button styles are active