Powermatic 1791079K PM1300TX-CK Dust Collector, 1.75HP 1PH 115/230V, 2-Micron Canister Kit

The PM1300TX Dust Collector features the exclusive TurboCone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility.

Features:

• TurboCone improves chip separation and collector bag packing efficiency
• The cone eliminates premature filter clogging for sustained performance
• Remote-controlled digital timer can be programmed for up to 99 minutes
• Canister filter offers over six times filtering surface area of standard bags
• All-metal duct construction for rigidity and improved air flow
• Dual 4" dust ports for simultaneous collection from two machines
• 1-3/4HP motor offers plenty of power for effective air movement
• Collection bag uses a snap ring for rapid installation and removal
• 10 cubic feet capacity collection bag reduces number of bag changes.
• Four swivel casters for shop maneuverability

Specifications:

• Air Flow @ 6" (CFM) 1,064 
• Number of Air Inlets 3 
• Efficiency (Micron) 2 
• Static Pressure (WC) 11.31 
• Sound Rating (DB) 75 - 90 
• Bag Diameter (In.) 20 
• Collection Bag Capacity (Cu. Ft.) 10 
• Collection Bag Length (In.) 30 
• Filter Bag/Canister Length (In.) 26 
• Impeller Diameter (In.) 12 
• Impeller Fins 6 
• Impeller Material Steel 
• Velocity @ 6" (CFM) 5,374 
• 1-Hose Connection Diameter (In.) 6 
• 2-Hoses Connection Diameter (In.) 4 
• Motor Power (HP) 1-3/4 
• Motor Phase 1 
• Motor Voltage (V.) 115, 230 
• Prewired Voltage (V.) 115 
• Motor Current (Amps) 15, 7-1/2

Warranty and Service:

Walter Meier (Manufacturing) Inc. warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier (Manufacturing) Inc. Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.

Powermatic 5-year Warranty:

POWERMATIC products carry a limited warranty which varies in duration based upon the product. This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage. The warranty covers only the initial purchaser of the product.