Baileigh IJ-1288P-HH; 230V 1 Phase 5hp 12" Parallelogram Jointer, 88" Table Length, 5500 rpm, 4" Helical Insert Head 1020255
Baileigh IJ-1288P-HH; 230V 1 Phase 5hp 12" Parallelogram Jointer, 88" Table Length, 5500 rpm, 4" Helical Insert Head 1020255
Couldn't load pickup availability
Details
Details
1020255, Baileigh IJ-1288P-HH, 230V 1Ph, 5hp, 12in Parallelogram Jointer
Our largest jointer, the IJ-1288P-HH makes your shop safer, thanks to its parallelogram design. The 12” width and 5 hp motor open possibilities by letting you tackle big pieces of lumber.
Features:
- Runs on 220-volt single-phase power, so it will work almost anywhere.
- Straight 4-row spiral cutter head (4” diameter) spins at 5,500 rpm.
- Extra-long 88” bed offers better work support for large pieces.
- Built-in rabbeting ledge helps you easily make grooves down the sides of boards for edge joining.
- 6” x 47” fence tilts in and out with stops at 90° and 45° for edge joining.
- Non-mar insert in the fence prevents the table from scratching the surface during adjustments.
- Parallelogram-style table stays close to the cutter and maintains a narrow, consistent gap, regardless of the cut depth.
- With a parallelogram jointer, your shop is less prone to dangerous accidents. You’re less likely to slip a board—or a hand—into the gap!
- This design also improves your finished product and lets you adjust the depth of cut more quickly.
- Table remains perfectly parallel, even after years of use.
- Convenient handwheel lets you adjust the cut depth up to ⅛”.
- Digital read out for depth of cut, makes repeating cuts easy.
- 6” dust port connects to your dust collection system for a cleaner work area and more breathable air.
- Covered by a 1-year parts warranty.
Specifications:
- Item Number IJ-1288P-HH
- Shipping Weight 900lbs
- Dust Collection Port 6"
- Table Size (Length) 88"
- Table Size (Width) 12"
- RPM 5500
- Fence Size 6" x 47"
- Fence Tilt Yes
- Table Tilt (degrees) 45º
- Maximum Rabbeting Capacity 3/4"
- Cutter Head Diameter 4"
- Max Stock Width 12"
- Jointer Maximum Cutting Depth 1/8"
- Power 220V Single Phase
- Horse Power 5
- Weight (lbs) 880
- Rabbet Ledge 3" x 13-3/4"
- Number of Inserts 56
- Insert Rows 4
- Shipping Dimensions (Inches) 96x44x52
* specifications subject to change without notice.
Specifications
Specifications
| Baileigh IJ-1288P-HH; 230V 1 Phase 5hp 12" Parallelogram Jointer, 88" Table Length, 5500 rpm, 4" Helical Insert Head 1020255 | |
| APPLICATION | Wood Working |
| BRAND COMPATIBILITY | Baileigh |
| Brand | Baileigh |
| HORSEPOWER | 5 HP |
| POWER SOURCE | Electric - Corded |
| PRODUCT TYPE | Tools/Machinery |
| TOOL TYPE | Jointers |
| VOLTAGE | 208V-240V 1Ph |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Custom add to cart button styles are active