After the depth of cut has been determined, selecting the proper feed rate is essential. For fi nish sanding the best
fi nish is usually achieved with a slow to moderate feed rate. This allows for the most revolutions of the drum per
inch of sanding. Faster feed rates can be used as long as the machine is not over-stressed.
When fi nish sanding with grits fi ner than 80, the best fi nish can usually be obtained if INTELLISAND does not
engage. If INTELLISAND does slow the conveyor when fi nish sanding, it is best to make another sanding pass
without changing the thickness setting and sand again.Sizes for Machines16 – Works with 16-32 Drum Sander & 13″ Combinations Sander22 V1 – Works with ShopPro 25, 22-44 Pro & Performax 25×2 w/1″ rollers22 V2 – Works with 19-38 Combination Sander, 22-44 Plus24 – Works with 25″ Bed, 2″ Rollers