{"product_id":"kreg-adaptive-cutting-system-master-kit-with-plunge-cut-track-saw-62-in-track-project-table-12a-120v-acsct3000","title":"Kreg Adaptive Cutting System Master Kit with Plunge-Cut Track Saw, 62 in. Track \u0026 Project Table, 12A, 120V ACSCT3000","description":"\u003cp\u003eThe Kreg ACSCT3000 Adaptive Cutting System Master Kit combines a corded plunge-cut track saw, a 62 in. Universal Track, and a folding Project Table into a unified guided cutting workstation. Powered by a 12 A, 120V motor, this system provides a portable alternative to traditional table saws for breaking down full-size plywood sheets, ripping solid hardwoods, and executing precise crosscuts, miters, and bevels.\u003c\/p\u003e\n\n\u003cp\u003eThe included 62 in. Universal Track features a zero-offset design that aligns the track edge directly with the cutline to eliminate offset measuring and guesswork. High-friction GripMaxx strips on the track underside hold the guide firmly on workpieces to reduce clamping needs on standard cuts, while zero-clearance anti-chip strips support wood fibers directly at the blade edge to minimize surface tear-out. For right-handed woodworkers, the blade-left saw configuration delivers a clear sightline along the cutline. Integrated safety controls include a spring-loaded riving knife that keeps the kerf open to reduce kickback risk, an electronic blade brake for rapid blade stops, and selectable anti-kickback control.\u003c\/p\u003e\n\n\u003cp\u003eThe Project Table integrates a 55 in. x 29-3\/4 in. flat MDF surface reinforced by an aluminum frame and mounted to a heavy-gauge steel folding base with rolling wheels. Its height-adjustable legs allow working heights between 33.52 in. and 36.18 in. Track hinges connect directly to the Universal Track, enabling the track and saw to lift out of the way for board positioning and lower flat onto the workpiece. Integrated measuring scales (0 to 48 in.), Versa-Stops, repetitive stops, and a miter guide allow accurate setups for 90-degree cuts, miters up to 60 degrees, and bevel cuts from -1 degree to 47 degrees. A swing-out anti-tip tab on the saw base locks into the track channel to prevent tipping during angled and bevel cuts.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e12 A, 120V Motor:\u003c\/strong\u003e Delivers consistent corded cutting performance through sheet goods and thick hardwoods.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e62 in. Universal Track:\u003c\/strong\u003e Provides up to 50 in. cutting capacity off the table and 48 in. on the table with a zero-offset edge aligned directly to the cutline.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eZero-Clearance Anti-Chip Strip:\u003c\/strong\u003e Supports wood fibers along the cut path to deliver splinter-free edges on plywood, MDF, and solid wood.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGripMaxx Strips:\u003c\/strong\u003e Holds the track in position without requiring clamps for standard straight cuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReinforced Project Table:\u003c\/strong\u003e Features a 55 in. x 29-3\/4 in. flat MDF surface with aluminum frame reinforcement to support large panels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFolding \u0026amp; Rolling Steel Base:\u003c\/strong\u003e Provides jobsite stability with height-adjustable legs ranging from 33.52 in. to 36.18 in. and compact storage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Material Positioning:\u003c\/strong\u003e Equipped with primary\/secondary rulers, Versa-Stops, repetitive stops, and a miter guide for repeatable miters (0 to 60 degrees) and crosscuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade-Left Sightline:\u003c\/strong\u003e Optimized for right-handed operators to keep the cutline visible during operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnti-Tip Protection:\u003c\/strong\u003e Swing-out baseplate tab locks into the track guide slot to maintain stability during bevel cuts from -1 to 47 degrees.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Safety System:\u003c\/strong\u003e Features a spring-loaded riving knife, electronic blade brake, and selectable anti-kickback switch.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDust Collection Port:\u003c\/strong\u003e Includes a dust-collection bag and port to keep the cutting surface clear of chips and debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) Adaptive Cutting System Plunge-Cut Track Saw\u003c\/li\u003e\n  \u003cli\u003e(1) Universal Track - 62 in.\u003c\/li\u003e\n  \u003cli\u003e(1) 6-1\/2 in. 48-Tooth Carbide-Tipped Saw Blade\u003c\/li\u003e\n  \u003cli\u003e(1) Project Table Top with Guides and Stops\u003c\/li\u003e\n  \u003cli\u003e(1) Project Table Base\u003c\/li\u003e\n  \u003cli\u003e(1) Dust-Collection Bag\u003c\/li\u003e\n  \u003cli\u003e(1) Owner's Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBuyers who require untethered jobsite portability without power cord restrictions may consider the cordless Kreg 20V Ionic Drive Master Kit (ACSCT3000B), which includes a 20V cordless plunge-cut saw, battery, and charger. For dedicated shop spaces or production environments requiring continuous runtime, this corded ACSCT3000 Master Kit provides consistent power without battery downtime.\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":45059338895453,"sku":"KJACSCT3000","price":1046.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/output_08343be2-7e62-498a-a444-378e27961211.jpg?v=1789573956","url":"https:\/\/beavertools.com\/products\/kreg-adaptive-cutting-system-master-kit-with-plunge-cut-track-saw-62-in-track-project-table-12a-120v-acsct3000","provider":"Beaver Industrial Supply","version":"1.0","type":"link"}