{"title":"Mafell Routers \u0026 Sanders","description":null,"products":[{"product_id":"mafell-adapter-sleeve-ground-3-mm-207944","title":"Mafell 3mm Adapter Sleeve (Ground) 207944","description":"\u003cp\u003eThe Mafell 207944 3mm Adapter Sleeve is a precision-ground reduction sleeve designed to adapt smaller router bits and milling cutters for use in standard 8mm tool holders. This sleeve provides a secure, accurate grip for 3mm micro-shank tooling, reducing runout and helping maintain clean cuts during fine precision routing and milling applications.\u003c\/p\u003e\n\u003cp\u003eThis adapter is fully compatible with the Mafell FM 1000 WS, FM 1000 PV-WS, and FM 1000 NC-WS Milling Motors, as well as the Mafell LO 55 Router. It inserts directly into the machine's primary holding fixture, allowing operators to execute quick tool changes without replacing the entire collet assembly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Ground:\u003c\/strong\u003e Ensures accurate concentricity and minimizes bit runout for higher-quality surface finishes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Reduction:\u003c\/strong\u003e Adapts 8mm native collets or tool-less holders to accept 3mm shank tooling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Verified for use with Mafell FM 1000 WS, FM 1000 PV-WS, FM 1000 NC-WS, and LO 55 models.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick Setup:\u003c\/strong\u003e Allows operators to switch to metric micro-bits rapidly without requiring a full collet swap.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45042985533533,"sku":"ML207944","price":33.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/207944_0122_zoom_1920x1920_832d41ab-6a4b-451f-9656-0724c1759988.jpg?v=1791553719"},{"product_id":"mafell-lo-65-ec-midimax-2-9-16-in-hand-router-3-5-hp-240v-t-max-case-91c723","title":"Mafell LO 65 Ec MidiMAX 2-9\/16 in. Hand Router, 3.5 HP, 240V, T-MAX Case 91C723","description":"\u003cp\u003eThe Mafell LO 65 Ec MidiMAX 240V Hand Router delivers high torque and cutting capacity for timber framing, stair housing routing, and heavy-duty woodworking applications. Powered by a 2,600 W (3.5 hp) CUprex motor, this router handles deep grooving, timber profiling, fitting installation, and heavy dovetail joints using Lignatool or Arunda joinery systems.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for control and repeatable accuracy, the LO 65 Ec features digital electronic controls with continuously variable speed selection ranging from 10,000 to 22,000 rpm. The fine depth adjustment locks firmly into position to prevent setting drift and minimize refinishing work. Bit replacements are straightforward by turning the router upside down to engage the spindle lock, while the base plate features an integrated groove for flush trimming edge bands without auxiliary attachments.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCUprex High-Output Motor:\u003c\/strong\u003e Provides 2,600 W (3.5 hp) power for fast cutting in solid wood and composite board materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Variable Speed Control:\u003c\/strong\u003e Maintains steady RPM under load and adjusts continuously from 10,000 to 22,000 rpm for optimal bit speed matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Depth Fine Adjustment:\u003c\/strong\u003e Sets depth up to 2 9\/16 in. (0 - 65 mm) and locks in place to maintain exact cut depth consistency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Lock Mechanism:\u003c\/strong\u003e Facilitates convenient cutter changes when the machine is inverted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Plate Edge-Trimming Groove:\u003c\/strong\u003e Integrated base plate channel enables direct flush trimming of edge banding without additional jigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Loss Protection Switch:\u003c\/strong\u003e Guards against unexpected motor startup after power supply interruptions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-MAX Transport Case:\u003c\/strong\u003e Includes a dedicated storage box for protective transport between job sites.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Template guide 30 mm (1 3\/16 in.) (Ref. No. 038971)\u003c\/li\u003e\n\u003cli\u003e1 Adapter with internal shaft M 12 x 1 (Ref. No. 201575)\u003c\/li\u003e\n\u003cli\u003e1 Single-end spanner 22 mm (Ref. No. 093012)\u003c\/li\u003e\n\u003cli\u003e1 Chip collector (Ref. No. 204325)\u003c\/li\u003e\n\u003cli\u003e1 Mains cable 4 m (13.1 ft)\u003c\/li\u003e\n\u003cli\u003e1 Transport and storage box T-MAX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45044453277789,"sku":"ML91C723","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/lo65ec_midimax_2023_zoom_1920x1920_4812707f-f696-4621-b686-9d6171b18980.jpg?v=1789397352"},{"product_id":"mafell-adapter-for-hand-router-lo-fa-207200","title":"Mafell Hand Router Adapter for Guide Rails 207200","description":"\u003cp\u003eThe Mafell LO-FA Hand Router Adapter (Ref. 207200) is a versatile accessory designed for use with Mafell LO 55 and LO 65 Ec hand routers. It functions as a parallel fence, pocket adaptor, and guide rail adapter compatible with Mafell F guide rails as well as other industry-standard guide rail systems. It excels at routing clean edge distances and cutting accurate circular pockets or step treads.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Functional Design:\u003c\/strong\u003e Serves as a parallel fence, pocket adapter, and guide rail adapter for expanded routing capabilities.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Fits Mafell LO 55 and LO 65 Ec routers and works with Mafell F guide rails and select third-party rail systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Adjustments:\u003c\/strong\u003e Features stop jaw adjustment from 0 to 54 mm and a milling radius capacity ranging from 97 to 380 mm.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Built in Germany to rigorous industrial standards with a lightweight yet rigid profile weighing 1.2 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) LO-FA Hand Router Adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067888558173,"sku":"ML207200","price":374.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/207200_zoom_1920x1920_ae9ab778-4cc8-4ed8-b717-2aa0e3c7026f.jpg?v=1791555184"},{"product_id":"mafell-portal-control-m8-4-pol-5-m-208311","title":"Mafell PV Control Cable for FM 1000 PV Milling Motors, M8 4-Pole, 5 m 208311","description":"\u003cp\u003eThe Mafell 208311 PV Control Cable is a 5-meter portal connection cable designed specifically for Mafell PV (Portal Version) milling motors, including the FM 1000 PV, FM 1000 PV-WS, FM 1000 PV-ER, and FM 1650 PV-LO.\u003c\/p\u003e\n\u003cp\u003eEquipped with an M8 4-pole connector, this cable serves as the essential communication link between the CNC portal controller and the milling motor, ensuring accurate signal transmission for remote speed control and continuous monitoring.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Communication:\u003c\/strong\u003e Links the CNC portal controller directly to the milling motor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Connection:\u003c\/strong\u003e Features a durable M8 4-pole connector for reliable signal transmission.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmple Length:\u003c\/strong\u003e The 5-meter length easily accommodates most standard CNC routing table setups.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Works seamlessly with all Mafell Portal Version (PV) milling motors.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067902648413,"sku":"ML208311","price":41.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/208311_zoom_1920x1920_c14ff1f0-2a21-4c80-977d-187694800ad0.jpg?v=1791552701"},{"product_id":"mafell-collet-chuck-adapter-er-16-incl-union-nut-er-16-208109","title":"Mafell Collet Chuck Adapter ER 16 with Union Nut 208109","description":"\u003cp\u003eThe Mafell Collet Chuck Adapter ER 16 (Ref. No. 208109) with included union nut is a precision tooling accessory engineered for Mafell milling motors, such as the FM 1000 PV-WS and NC-WS series. Designed to expand tooling compatibility, this ER 16 collet adapter enables the secure and concentric mounting of standard ER 16 routing and milling bits up to a maximum speed of 16,000 RPM.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to strict industrial tolerances, the adapter ensures high runout accuracy, minimizing vibration and maintaining clean cutting performance during high-speed CNC milling and routing operations. The included ER 16 union nut provides secure clamping retention for safe tool changing and reliable operation in gantry and fixed-mount applications.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eER 16 Standard Compatibility:\u003c\/strong\u003e Accepts standard ER 16 collets and tooling shanks for broad milling bit versatility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Union Nut:\u003c\/strong\u003e Supplied complete with the matching ER 16 union nut for immediate installation and secure clamping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16,000 RPM Max Speed:\u003c\/strong\u003e Engineered to operate reliably at speeds up to 16,000 RPM in high-frequency milling motors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Precision Runout:\u003c\/strong\u003e Precision-machined tolerances minimize tool vibration and enhance milling finish quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e Designed specifically for Mafell FM 1000 milling motor series (including PV-WS and NC-WS variants).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067904286813,"sku":"ML208109","price":114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/208109_zoom_1920x1920_004f60be-1783-4d54-b782-88fcad097cee.jpg?v=1791553341"},{"product_id":"mafell-adapter-sleeve-ground-4-mm-207949","title":"Mafell 4mm Adapter Sleeve (Ground) 207949","description":"\u003cp\u003eThe Mafell 207949 4mm Adapter Sleeve is a precision-ground reduction sleeve designed to adapt smaller router bits and milling cutters for use in standard 8mm tool holders. This sleeve provides a secure, accurate grip for 4mm shank tooling, reducing runout and helping maintain clean cuts during precision routing and milling applications.\u003c\/p\u003e\n\u003cp\u003eThis adapter is fully compatible with the Mafell FM 1000 WS, FM 1000 PV-WS, and FM 1000 NC-WS Milling Motors, as well as the Mafell LO 55 Router. It inserts directly into the machine's primary holding fixture, allowing operators to execute quick tool changes without replacing the entire collet assembly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Ground:\u003c\/strong\u003e Ensures accurate concentricity and minimizes bit runout for higher-quality surface finishes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Reduction:\u003c\/strong\u003e Adapts 8mm native collets or tool-less holders to accept 4mm shank tooling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Verified for use with Mafell FM 1000 WS, FM 1000 PV-WS, FM 1000 NC-WS, and LO 55 models.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick Setup:\u003c\/strong\u003e Allows operators to switch to smaller metric bits rapidly without requiring a full collet swap.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067908612189,"sku":"ML207949","price":33.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/207949_0122_zoom_1920x1920_dc87329a-e76f-4ab1-883d-11b5fbb2b51e.jpg?v=1791553423"},{"product_id":"mafell-adapter-sleeve-ground-6-mm-207946","title":"Mafell 6mm Adapter Sleeve (Ground) 207946","description":"\u003cp\u003eThe Mafell 207946 6mm Adapter Sleeve is a precision-ground reduction sleeve designed to adapt smaller router bits and milling cutters for use in standard 8mm tool holders. This sleeve provides a secure, accurate grip for 6mm shank tooling, reducing runout and helping maintain clean cuts during precision routing and milling applications.\u003c\/p\u003e\n\u003cp\u003eThis adapter is fully compatible with the Mafell FM 1000 WS, FM 1000 PV-WS, and FM 1000 NC-WS Milling Motors, as well as the Mafell LO 55 Router. It inserts directly into the machine's primary holding fixture, allowing operators to execute quick tool changes without replacing the entire collet assembly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Ground:\u003c\/strong\u003e Ensures accurate concentricity and minimizes bit runout for higher-quality surface finishes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Reduction:\u003c\/strong\u003e Adapts 8mm native collets or tool-less holders to accept 6mm shank tooling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Verified for use with Mafell FM 1000 WS, FM 1000 PV-WS, FM 1000 NC-WS, and LO 55 models.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick Setup:\u003c\/strong\u003e Allows operators to switch to smaller metric bits rapidly without requiring a full collet swap.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067909267549,"sku":"ML207946","price":33.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/207946_0122_zoom_1920x1920_dc4f4a73-cba6-4325-88d0-368e4cd5912b.jpg?v=1791553618"},{"product_id":"mafell-collet-chuck-adapter-oz-incl-union-nut-oz-207943","title":"Mafell Collet Chuck Adapter OZ with Union Nut OZ 207943","description":"\u003cp\u003eThe Mafell Collet Chuck Adapter OZ (Ref. No. 207943) is an engineered tooling accessory designed to expand collet compatibility and secure cutting tools with precision clamping force in compatible Mafell woodworking machines and routers. Supplied complete with the matching OZ union nut, this adapter ensures secure, concentric tool retention to minimize runout and maintain high-speed machining accuracy.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision OZ Clamping:\u003c\/strong\u003e Secures routing and milling bits with high concentricity to reduce vibration and improve finish quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Assembly:\u003c\/strong\u003e Includes the matching OZ union nut for immediate installation and secure collet retention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Fabricated from high-grade alloy steel to withstand high rotational speeds and demanding shop environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Collet Chuck Adapter OZ\u003c\/li\u003e\n\u003cli\u003e(1) Union Nut OZ\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067911430237,"sku":"ML207943","price":75.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/207943_zoom_1920x1920_8c3085bc-4ae7-4cd1-b15e-2f7044bb6b3a.jpg?v=1791553785"},{"product_id":"mafell-collet-chuck-adapter-oz-8-incl-union-nut-oz-8-208962","title":"Mafell Collet Chuck Adapter OZ 8 with Union Nut for FM 1000 Milling Motors 208962","description":"\u003cp\u003eThe Mafell Collet Chuck Adapter OZ 8 (Ref. 208962) is a precision toolholding accessory designed for Mafell FM 1000 series milling motors. Engineered for high-speed routing, milling, and engraving operations, this adapter secures OZ 8 series router bits and cutting tools firmly within the motor spindle.\u003c\/p\u003e\n\n\u003cp\u003eSupplied complete with the matched union nut, the adapter ensures high concentricity and rigid clamping tolerance up to a recommended maximum speed of 16,000 RPM. Its robust construction maintains secure tool retention under lateral milling loads, ensuring clean finish quality and reliable tool life in professional CNC and manual routing setups.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOZ 8 Collet Compatibility:\u003c\/strong\u003e Secures 8 mm shank milling cutters and routing bits with high gripping strength.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes Union Nut:\u003c\/strong\u003e Comes complete with the matching threaded union nut for immediate installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Speed Balance:\u003c\/strong\u003e Certified for smooth operation up to a maximum spindle speed of 16,000 RPM.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise Concentricity:\u003c\/strong\u003e Minimizes tool runout to ensure clean cutting edges and precise profile milling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDedicated Motor Fit:\u003c\/strong\u003e Engineered specifically for Mafell FM 1000 milling motor spindles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) Collet Chuck Adapter OZ 8 (Ref. No. 208962)\u003c\/li\u003e\n  \u003cli\u003e(1) Union Nut OZ 8\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067913330781,"sku":"ML208962","price":77.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/208962_zoom_1920x1920_6c3b59e5-eca0-4bd7-bfb5-1a66f6b95b39.jpg?v=1791552402"},{"product_id":"mafell-adapter-for-router-bits-with-int-shaft-m-10-39363","title":"Mafell Adapter for Router Bits with Internal Shaft M10 39363","description":"\u003cp\u003eThe Mafell 039363 adapter enables the Mafell LO 65Ec hand router (as well as the legacy LO 65E) to utilize router bits featuring an M10 internal thread from other manufacturers. This expands tooling versatility and allows operators to integrate specialized bits into their routing workflow.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooling Versatility:\u003c\/strong\u003e Converts the router spindle interface to accept M10 internal shaft router bits.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Fit:\u003c\/strong\u003e Engineered for secure, concentric mounting on Mafell LO 65Ec routers without vibration or slip.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Build:\u003c\/strong\u003e Built with high-grade industrial materials for secure clamping under heavy routing loads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x M10 Router Bit Adapter (039363)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067914969181,"sku":"ML39363","price":56.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/039363_zoom_1920x1920_c8b9d7ce-25bb-4fe0-93e8-d37b507cb2f5.jpg?v=1791901751"},{"product_id":"mafell-adapter-sleeve-ground-1-8-3-175-mm-207945","title":"Mafell 1\/8 in. (3.175 mm) Adapter Sleeve (Ground) 207945","description":"\u003cp\u003eThe Mafell 207945 1\/8 in. (3.175 mm) Adapter Sleeve is a precision-ground reduction sleeve designed to adapt 1\/8-inch router bits and milling cutters for use in standard 8mm tool holders. This sleeve provides a secure, accurate grip for Imperial micro-shank tooling, reducing runout and helping maintain clean cuts during fine precision routing and milling applications.\u003c\/p\u003e\n\u003cp\u003eThis adapter is fully compatible with the Mafell FM 1000 WS, FM 1000 PV-WS, and FM 1000 NC-WS Milling Motors, as well as the Mafell LO 55 Router. It inserts directly into the machine's primary holding fixture, allowing operators to execute quick tool changes without replacing the entire collet assembly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Ground:\u003c\/strong\u003e Ensures accurate concentricity and minimizes bit runout for higher-quality surface finishes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Reduction:\u003c\/strong\u003e Adapts 8mm native collets or tool-less holders to accept 1\/8 in. (3.175 mm) shank tooling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Verified for use with Mafell FM 1000 WS, FM 1000 PV-WS, FM 1000 NC-WS, and LO 55 models.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick Setup:\u003c\/strong\u003e Allows operators to switch to Imperial micro-bits rapidly without requiring a full collet swap.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067923521629,"sku":"ML207945","price":33.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/207945_0122_zoom_1920x1920_c270443f-ff8f-40f7-92b0-85f5969b5974.jpg?v=1791553669"},{"product_id":"mafell-adapter-sleeve-ground-1-4-6-35-mm-207947","title":"Mafell 1\/4 in. (6.35 mm) Adapter Sleeve (Ground) 207947","description":"\u003cp\u003eThe Mafell 207947 1\/4 in. (6.35 mm) Adapter Sleeve is a precision-ground reduction sleeve designed to adapt 1\/4-inch router bits and milling cutters for use in standard 8mm tool holders. This sleeve provides a secure, accurate grip for Imperial shank tooling, reducing runout and helping maintain clean cuts during precision routing and milling applications.\u003c\/p\u003e\n\u003cp\u003eThis adapter is fully compatible with the Mafell FM 1000 WS, FM 1000 PV-WS, and FM 1000 NC-WS Milling Motors, as well as the Mafell LO 55 Router. It inserts directly into the machine's primary holding fixture, allowing operators to execute quick tool changes without replacing the entire collet assembly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Ground:\u003c\/strong\u003e Ensures accurate concentricity and minimizes bit runout for higher-quality surface finishes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Reduction:\u003c\/strong\u003e Adapts 8mm native collets or tool-less holders to accept 1\/4 in. (6.35 mm) shank tooling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Verified for use with Mafell FM 1000 WS, FM 1000 PV-WS, FM 1000 NC-WS, and LO 55 models.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick Setup:\u003c\/strong\u003e Allows operators to switch to Imperial bits rapidly without requiring a full collet swap.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067924045917,"sku":"ML207947","price":33.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/207947_0122_zoom_1920x1920_992f0253-ee7a-43cc-9f07-ee35275f73d8.jpg?v=1791553559"},{"product_id":"mafell-adapter-for-router-bits-with-int-shaft-m-12-x-1-201575","title":"Mafell Router Bit Adapter with M 12 x 1 Internal Shaft 201575","description":"\u003cp\u003eThe Mafell 201575 Router Bit Adapter features an M 12 x 1 internal threaded shaft designed specifically for the Mafell LO 65 Ec Hand Router. This specialized adapter facilitates the use of dedicated tooling that utilizes an internal thread connection rather than a standard collet.\u003c\/p\u003e\n\u003cp\u003eThis adapter is a critical component for users operating the Arunda dovetailing system, as it securely mounts the Arunda Standard-26 dovetail bits to the LO 65 Ec router. Using the correct factory adapter ensures precise concentricity, minimal vibration, and safe operation during heavy material removal.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Threading:\u003c\/strong\u003e M 12 x 1 internal shaft provides a secure, perfectly aligned connection for specialized router bits.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArunda Compatibility:\u003c\/strong\u003e Essential for attaching Arunda Standard-26 reversible-blade dovetail bits to the router.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Quality:\u003c\/strong\u003e Factory Mafell component guarantees compatibility and maintains the performance standard of the LO 65 Ec.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067928141917,"sku":"ML201575","price":56.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/201575_zoom_1920x1920_ef66e36a-3f9d-48b1-9e5d-88ae96cbd652.jpg?v=1791568589"},{"product_id":"mafell-collet-chuck-oz-12-a-12-mm-93832","title":"Mafell OZ 12 Collet Chuck, 12 mm 93832","description":"\u003cp\u003eThe Mafell 093832 OZ 12 Collet Chuck provides precise metric tool clamping for Mafell milling motors utilizing the OZ 12 spindle configuration. Designed to accommodate heavy-duty router bits and industrial cutters with 12 mm shanks, this collet ensures exceptional grip strength and concentricity for demanding routing and CNC milling operations.\u003c\/p\u003e\n\u003cp\u003ePrecision engineering minimizes rotational runout, promoting smooth material removal and extended tool life across wood and composite machining applications.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRobust Metric Clamping:\u003c\/strong\u003e Firmly secures 12 mm tool shanks for high-load milling and profiling tasks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Concentricity:\u003c\/strong\u003e Engineered for minimal runout, resulting in superior surface finishes and reduced spindle wear.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDedicated Fit:\u003c\/strong\u003e Form-matched for seamless compatibility with Mafell OZ 12 milling motor chuck assemblies.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustrial Durability:\u003c\/strong\u003e Constructed from high-strength alloy steel to withstand continuous high-speed production demands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Mafell OZ 12 Collet Chuck, 12 mm (093832)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067937742941,"sku":"ML93832","price":46.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093832_zoom_1920x1920_bee56be0-ae96-4174-99b0-0fb59df97856.jpg?v=1791576411"},{"product_id":"mafell-collet-chuck-oz-a-6-mm-93733","title":"Mafell OZ Collet Chuck, 6 mm 93733","description":"\u003cp\u003eThe Mafell 093733 collet chuck allows Mafell milling motors and edge routers to accept 6 mm shank cutters. It ensures secure tool retention and precise rotational balance for smooth routing and edge work.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Adaptability:\u003c\/strong\u003e Enables the use of 6 mm shank bits in compatible Mafell motors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Retention:\u003c\/strong\u003e Provides reliable clamping pressure to maintain tool stability.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Component:\u003c\/strong\u003e Original Mafell part ensuring proper fit and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 6 mm Collet Chuck\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067937808477,"sku":"ML93733","price":30.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093734_zoom_1920x1920_4995984e-8f35-4dfc-ad9f-7e5af6a2f0a7.jpg?v=1791809699"},{"product_id":"mafell-collet-chuck-oz-12-a-1-8-3-175-mm-93833","title":"Mafell OZ 12 Collet Chuck, 1\/8 in. 93833","description":"\u003cp\u003eThe Mafell 093833 OZ 12 Collet Chuck is an engineered clamping accessory for Mafell milling motors equipped with the OZ 12 spindle design. Optimized for precision engraving, intricate model making, and fine detail routing, this collet securely accommodates cutting tools and bits with 1\/8 in. shanks.\u003c\/p\u003e\n\u003cp\u003eHigh concentricity accuracy minimizes runout, ensuring clean edges and precise detail replication when working with plastics, non-ferrous metals, and wood.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Micro-Clamping:\u003c\/strong\u003e Securely holds 1\/8 in. shank diameter tools for fine engraving and intricate profiling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow Runout Design:\u003c\/strong\u003e Maintains tight concentric tolerances to reduce vibration and improve finish quality on detailed workpieces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Engineered specifically for Mafell milling motors using the OZ 12 collet standard.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Industrial Quality:\u003c\/strong\u003e Premium hardened steel construction built for reliable long-term performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Mafell OZ 12 Collet Chuck, 1\/8 in. (093833)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067937874013,"sku":"ML93833","price":46.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093833_zoom_1920x1920_92f89737-2514-4c01-8a25-c0e79b8f3eaf.jpg?v=1791576354"},{"product_id":"mafell-collet-chuck-oz-8-a-6-mm-93814","title":"Mafell OZ 8 Collet Chuck, 6 mm 93814","description":"\u003cp\u003eThe Mafell 093814 OZ 8 Collet Chuck is designed to securely hold 6 mm shank bits in compatible Mafell milling motors and edge routers. Providing exceptional concentricity, it minimizes vibration during high-speed routing operations. This item includes the collet only and requires a 6-spline collet union nut (Model 093818) for operation.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAccurate Clamping:\u003c\/strong\u003e Engineered to hold 6 mm shank tools securely with minimal runout for superior surface finishes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline Architecture:\u003c\/strong\u003e Built specifically for current 6-spline Mafell spindle designs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRobust Quality:\u003c\/strong\u003e Premium hardened steel construction withstands heavy professional workloads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x OZ 8 Collet (6 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067937939549,"sku":"ML93814","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093814_0522_zoom_1920x1920_e319aadf-f7a9-4588-a2f3-d66a26fac26a.jpg?v=1791577557"},{"product_id":"mafell-collet-chuck-oz-8-a-10-mm-93822","title":"Mafell OZ 8 Collet Chuck, 10 mm 93822","description":"\u003cp\u003eThe Mafell 093822 OZ 8 Router Collet is engineered for precision tool holding in compatible Mafell milling motors and edge routers utilizing a 6-spline clamping system. Accommodating 10 mm shank tooling, this collet delivers exceptional concentricity and secure grip to maintain accuracy during demanding milling, routing, and engraving tasks.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Clamping:\u003c\/strong\u003e Designed for 10 mm shank diameter bits, ensuring tight, slip-free retention during high-speed operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Concentricity:\u003c\/strong\u003e Precision-machined to strict tolerances to reduce vibration and runout for superior surface finishes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline Compatibility:\u003c\/strong\u003e Tailored specifically for use with Mafell 6-spline collet union nuts and compatible milling spindles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 10 mm OZ 8 Collet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067938005085,"sku":"ML93822","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093822_zoom_1920x1920_9b6ec697-e619-47ee-99ee-4495f73830a2.jpg?v=1791576970"},{"product_id":"mafell-collet-chuck-oz-8-a-4-mm-93813","title":"Mafell OZ 8 Collet Chuck, 4 mm 93813","description":"\u003cp\u003eThe Mafell 093813 OZ 8 Collet Chuck accommodates 4 mm shank tooling for intricate routing, profiling, and engraving tasks on Mafell milling motors and edge routers. Featuring a precision 6-spline configuration, it ensures tight grip and smooth, concentric rotation. This item includes the collet only and requires a 6-spline collet union nut (Model 093818).\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro-Tool Support:\u003c\/strong\u003e Enables the secure use of 4 mm shank bits for detailed template work and fine engraving.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Concentricity:\u003c\/strong\u003e Precision machining reduces runout, protecting small-diameter cutters from premature breakage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline Compatibility:\u003c\/strong\u003e Fits modern 6-spline Mafell milling motor and edge router assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x OZ 8 Collet (4 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067939610717,"sku":"ML93813","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093813_0522_zoom_1920x1920_a33ccb0e-ad29-4b61-b1f1-9b6fac87a098.jpg?v=1791577616"},{"product_id":"mafell-collet-chuck-oz-8-a-1-4-6-35-mm-93811","title":"Mafell OZ 8 Collet Chuck, 1\/4 in. 93811","description":"\u003cp\u003eThe Mafell 093811 1\/4 in. OZ 8 6-Spline Collet Chuck enables compatible Mafell milling motors and edge routers to accept standard 1\/4 in. shank router bits from various manufacturers. It provides secure retention and dependable concentricity for precision milling tasks.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Compatibility:\u003c\/strong\u003e Expands routing capabilities by allowing Mafell motors to utilize 1\/4 in. shank tools.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline Construction:\u003c\/strong\u003e Features a 6-spline design for enhanced clamping force and operational stability.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Fit:\u003c\/strong\u003e Installs into compatible Mafell collet union nuts for straightforward tooling changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 1\/4 in. OZ 8 6-Spline Collet Chuck (093811)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067939872861,"sku":"ML93811","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093811_0522_zoom_1920x1920_b4324de3-cff9-4fc3-911e-a6d7be4eb515.jpg?v=1791577760"},{"product_id":"mafell-collet-a-8-mm-93256","title":"Mafell 8 mm Router Collet 93256","description":"\u003cp\u003eThe Mafell 093256 8 mm Router Collet is an OEM replacement or accessory collet specifically designed for the Mafell LO 65 Ec hand router. It provides precise, secure clamping for 8 mm shank router bits, ensuring optimal concentricity and minimizing runout during demanding milling operations.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise Fit:\u003c\/strong\u003e OEM Mafell tooling ensures exact compatibility and minimizes runout for cleaner, more accurate cuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Clamping:\u003c\/strong\u003e Holds 8 mm shank bits firmly to prevent slipping under heavy routing loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Replacement:\u003c\/strong\u003e Fits all configurations of the LO 65 Ec router, including MidiMAX and MaxiMAX models.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067940266077,"sku":"ML93256","price":64.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093270_zoom_1920x1920_7b4ef4ba-9e1d-4e44-b829-bd41f3c85592.jpg?v=1791817568"},{"product_id":"mafell-collet-chuck-er-16-a-3-mm-93753","title":"Mafell ER 16 Collet Chuck, 3 mm 93753","description":"\u003cp\u003eThe Mafell 093753 ER 16 Collet Chuck accommodates 3 mm shank tooling for precision milling, micro-machining, and engraving applications using compatible Mafell milling motors such as the FM 1000 PV-ER and FM 1000 NC-ER. Designed to strict factory specifications, it ensures optimal gripping force and concentricity for fine-detail work.\u003c\/p\u003e\n\u003cp\u003eMinimizing runout at high RPMs protects delicate micro-tools from premature breakage and ensures clean, accurate cuts in specialized materials.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro-Tool Support:\u003c\/strong\u003e Securely clamps 3 mm shank bits for fine engraving and intricate milling work.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Alignment:\u003c\/strong\u003e Delivers high concentricity to reduce runout and tool stress.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRigid Retention:\u003c\/strong\u003e Maintains consistent clamping pressure during high-speed routing tasks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Quality:\u003c\/strong\u003e Manufactured to match factory tolerances for Mafell ER 16 spindles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Collet chuck ER 16 (3 mm diameter)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067940757597,"sku":"ML93753","price":62.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093753-093757_zoom_1920x1920_4d407df6-324f-43d3-ab6d-61e908de81d9.jpg?v=1791809143"},{"product_id":"mafell-union-nut-oz-12-93836","title":"Mafell Union Nut OZ 12 for Milling Motors 93836","description":"\u003cp\u003eThe Mafell 093836 Union Nut is a genuine replacement clamping component designed for Mafell milling motors utilizing the OZ 12 collet system. It provides secure, concentric retention of collet chucks and tooling for high-speed routing, shaping, and portal milling applications.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise Fit:\u003c\/strong\u003e Manufactured to exact factory tolerances to maintain high concentricity and balance during high-RPM operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Built to withstand repeated tightening and heavy-duty industrial milling cycles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Designed specifically for Mafell FM 1650 NC-LO and FM 1650 PV-LO milling motors using OZ 12 collets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Mafell Union Nut OZ 12 (093836)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067940888669,"sku":"ML93836","price":28.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093836_zoom_1920x1920_615e2f97-1a6f-49b2-a6b8-bea287509fce.jpg?v=1791575873"},{"product_id":"mafell-collet-chuck-set-oz-1-8-3-175-mm-93738","title":"Mafell OZ Collet and Nut Set, 1\/8 in. (3.175 mm) 93738","description":"\u003cp\u003eThe Mafell 093738 Collet Chuck Set features a 4-spline 1\/8 in. (3,175 mm) collet and matching union nut designed for legacy and standard Mafell milling motors and edge routers such as the FM 800, FM 1000, and KF 1000 utilizing 4-spline clamping interfaces. This set ensures precise tool centering and secure retention for 1\/8 in. shank bits.\u003c\/p\u003e\n\u003cp\u003eNote that this 4-spline set is built specifically for 4-spline union nut configurations and is not cross-compatible with newer 6-spline collet systems.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Set:\u003c\/strong\u003e Includes both the 1\/8 in. collet chuck and the matching union nut.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4-Spline Design:\u003c\/strong\u003e Matches older 4-spline motor spindles found on select Mafell FM and KF series units.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Clamping:\u003c\/strong\u003e Firmly grips 1\/8 in. (3,175 mm) shank tooling to prevent slippage during high-speed routing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Precision:\u003c\/strong\u003e Manufactured to exact factory tolerances to maintain concentricity and reduce vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Collet chuck OZ 3,175 mm (1\/8 in.)\u003c\/li\u003e\n  \u003cli\u003e1 Union nut (4-spline)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067941019741,"sku":"ML93738","price":44.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093738_zoom_1920x1920_bf423ced-7345-4593-b317-e57ef0935e29.jpg?v=1791809415"},{"product_id":"mafell-collet-chuck-oz-8-a-3-mm-93812","title":"Mafell OZ 8 Collet Chuck, 3 mm 93812","description":"\u003cp\u003eThe Mafell 093812 3 mm OZ 8 6-Spline Collet Chuck is designed for precision routing applications using compatible Mafell milling motors and edge routers. This component securely holds 3 mm shank tooling to deliver consistent, accurate performance during intricate woodworking and milling operations.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline Design:\u003c\/strong\u003e Engineered with a 6-spline configuration to ensure secure gripping power and reliable concentricity.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise Fit:\u003c\/strong\u003e Specifically machined for 3 mm shank tooling to minimize runout and maintain high precision.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e Designed for use with Mafell FM 800, FM 1000, and FM 1000 PV milling motors, as well as the KF 1000 edge router equipped with a 6-spline collet union nut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 3 mm OZ 8 6-Spline Collet Chuck (093812)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067941904477,"sku":"ML93812","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093812_0522_zoom_1920x1920_16070de2-245e-4d3b-a52c-e1ec8bed0620.jpg?v=1791577718"},{"product_id":"mafell-collet-chuck-oz-a-1-4-6-35-mm-93736","title":"Mafell OZ Collet Chuck, 1\/4 in. 93736","description":"\u003cp\u003eThe Mafell 093736 collet chuck is engineered for Mafell milling motors and edge routers, enabling the use of 1\/4 in. shank cutting tools. It ensures secure clamping and accurate concentricity for routing, trimming, and profiling work.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Compatibility:\u003c\/strong\u003e Allows Mafell motors to accept 1\/4 in. shank bits from various manufacturers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliable Retention:\u003c\/strong\u003e Maintains firm grip and concentric rotation at high speeds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Quality:\u003c\/strong\u003e Genuine Mafell replacement part designed to exact factory tolerances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 1\/4 in. Collet Chuck\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067942658141,"sku":"ML93736","price":30.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093734_zoom_1920x1920_4995984e-8f35-4dfc-ad9f-7e5af6a2f0a7.jpg?v=1791809699"},{"product_id":"mafell-union-nut-oz-8-93818","title":"Mafell OZ 8 6-Spline Collet Union Nut 93818","description":"\u003cp\u003eThe Mafell 093818 OZ 8 Collet Union Nut is a genuine replacement fastener designed specifically for securing 6-spline OZ 8 collets in compatible Mafell milling motors and edge routers. Superseding older legacy part numbers, this union nut ensures proper clamping pressure, even torque distribution, and secure collet retention during high-speed routing and milling tasks.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline Compatibility:\u003c\/strong\u003e Engineered exclusively for use with 6-spline OZ 8 collets on designated Mafell motors and routers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliable Clamping:\u003c\/strong\u003e Provides smooth threading and secure tightening force to keep collets and tooling locked firmly in place.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Replacement:\u003c\/strong\u003e Direct factory replacement part (superseding part number 093729) guaranteeing correct fit and operational safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Union Nut OZ 8 (6-spline)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067942723677,"sku":"ML93818","price":17.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093818_zoom_1920x1920_ef71922c-7610-43e3-933e-680d9001976d.jpg?v=1791577283"},{"product_id":"mafell-collet-chuck-oz-8-a-8-mm-93815","title":"Mafell OZ 8 Collet Chuck, 8 mm 93815","description":"\u003cp\u003eThe Mafell 093815 OZ 8 Collet Chuck provides reliable, high-precision clamping for 8 mm shank routing and milling tools. Engineered for Mafell 6-spline spindles, this collet ensures optimal concentricity and uniform clamping pressure. Note that this item includes the collet only; use with the corresponding 6-spline collet union nut (Model 093818).\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Fit:\u003c\/strong\u003e Manufactured to strict tolerances for maximum gripping strength and minimal tool runout.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline Design:\u003c\/strong\u003e Optimized for modern 6-spline Mafell milling motor spindles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e High-grade steel construction ensures long service life under demanding shop conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x OZ 8 Collet (8 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067942985821,"sku":"ML93815","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093815_zoom_1920x1920_74c377dc-d9e5-4c00-a579-bf681bea0091.jpg?v=1791577494"},{"product_id":"mafell-collet-a-12-mm-93254","title":"Mafell 12 mm Router Collet 93254","description":"\u003cp\u003eThe Mafell 093254 12 mm Router Collet is an OEM replacement or accessory collet specifically designed for the Mafell LO 65 Ec hand router. It provides precise, secure clamping for 12 mm shank router bits, ensuring optimal concentricity and minimizing runout during demanding milling operations.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise Fit:\u003c\/strong\u003e OEM Mafell tooling ensures exact compatibility and minimizes runout for cleaner, more accurate cuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Clamping:\u003c\/strong\u003e Holds 12 mm shank bits firmly to prevent slipping under heavy routing loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Replacement:\u003c\/strong\u003e Fits all configurations of the LO 65 Ec router, including MidiMAX and MaxiMAX models.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067943444573,"sku":"ML93254","price":67.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093270_zoom_1920x1920_7b4ef4ba-9e1d-4e44-b829-bd41f3c85592.jpg?v=1791817568"},{"product_id":"mafell-collet-chuck-er-16-a-1-8-3-175-mm-93757","title":"Mafell ER 16 Collet Chuck, 1\/8 in. (3.175 mm) 93757","description":"\u003cp\u003eThe Mafell 093757 ER 16 Collet Chuck provides reliable, high-precision tool holding for 1\/8 in. (3.175 mm) shank router bits and cutters. Designed for compatibility with Mafell milling motors such as the FM 1000 PV-ER and FM 1000 NC-ER, it delivers exceptional concentricity for detailed engraving, milling, and routing applications.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Concentricity:\u003c\/strong\u003e Precision machining ensures minimal runout for clean, accurate cuts and finer finishes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExact Sizing:\u003c\/strong\u003e Holds 1\/8 in. (3.175 mm) shank tooling securely under high operational loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication Versatility:\u003c\/strong\u003e Ideal for fine detail work, sign-making, model making, and PCB milling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x ER 16 Collet Chuck 1\/8 in. \/ 3.175 mm (093757)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067943837789,"sku":"ML93757","price":62.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093753-093757_zoom_1920x1920_04c27f38-fd85-4a53-9b8a-2e253a03c051.jpg?v=1791808957"},{"product_id":"mafell-collet-chuck-er-16-a-4-mm-93754","title":"Mafell ER 16 Collet Chuck, 4 mm 93754","description":"\u003cp\u003eThe Mafell 093754 ER 16 Collet Chuck is a precision-engineered clamping component designed for compatible Mafell milling motors featuring the ER 16 spindle system, including the FM 1000 PV-ER and FM 1000 NC-ER. Built for detailed routing, engraving, and fine woodworking or sign-making applications, this 4 mm collet secures small-diameter shank tooling with exceptional concentricity.\u003c\/p\u003e\n\u003cp\u003eStrict manufacturing tolerances minimize rotational runout, ensuring smooth operation, reduced vibration, and high repeatability during intricate milling tasks.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExact Compatibility:\u003c\/strong\u003e Form-fitted for Mafell ER 16 milling motor spindles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Concentricity:\u003c\/strong\u003e Centers 4 mm tooling accurately to prevent chatter and improve cut quality.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Material:\u003c\/strong\u003e Premium hardened steel construction withstands continuous high-speed rotation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliable Retention:\u003c\/strong\u003e Firmly grips shank tools to maintain safe and stable operation under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Collet chuck ER 16 (4 mm diameter)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067945345117,"sku":"ML93754","price":62.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093753-093757_zoom_1920x1920_4d407df6-324f-43d3-ab6d-61e908de81d9.jpg?v=1791809143"},{"product_id":"mafell-collet-chuck-set-oz-8-3-mm-93816","title":"Mafell OZ 8 Collet Chuck Set, 3 mm 93816","description":"\u003cp\u003eThe Mafell 093816 OZ 8 Collet Chuck Set enables the use of 3 mm shank bits with compatible Mafell milling motors and edge routers. Featuring a high-concentricity design for precision engraving, milling, and fine woodworking applications, this set includes both the 6-spline collet and the matching union nut.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Concentricity:\u003c\/strong\u003e Built to tight manufacturing tolerances to reduce runout and ensure clean, accurate finishes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Kit:\u003c\/strong\u003e Combines the precision OZ 8 collet with its matching 6-spline union nut for immediate installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication Versatility:\u003c\/strong\u003e Ideal for fine detail work, PCB milling, and precision engraving using 3 mm shank tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x OZ 8 Collet (3 mm)\u003c\/li\u003e\n  \u003cli\u003e1 x 6-Spline Collet Union Nut\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067945476189,"sku":"ML93816","price":49.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093816_0522_zoom_1920x1920_370414db-e341-4014-bce5-0eae7f02b353.jpg?v=1791577434"},{"product_id":"mafell-collet-a-10-mm-93255","title":"Mafell 10 mm Router Collet 93255","description":"\u003cp\u003eThe Mafell 093255 10 mm Router Collet is an OEM replacement or accessory collet specifically designed for the Mafell LO 65 Ec hand router. It provides precise, secure clamping for 10 mm shank router bits, ensuring optimal concentricity and minimizing runout during demanding milling operations.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise Fit:\u003c\/strong\u003e OEM Mafell tooling ensures exact compatibility and minimizes runout for cleaner, more accurate cuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Clamping:\u003c\/strong\u003e Holds 10 mm shank bits firmly to prevent slipping under heavy routing loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Replacement:\u003c\/strong\u003e Fits all configurations of the LO 65 Ec router, including MidiMAX and MaxiMAX models.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067949375581,"sku":"ML93255","price":64.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093270_zoom_1920x1920_7b4ef4ba-9e1d-4e44-b829-bd41f3c85592.jpg?v=1791817568"},{"product_id":"mafell-collet-chuck-oz-12-a-4-mm-93828","title":"Mafell OZ 12 Collet Chuck, 4 mm 93828","description":"\u003cp\u003eThe Mafell 093828 OZ 12 Collet Chuck provides precise clamping for 4 mm shank tooling used with compatible Mafell milling motors, including the FM 1650 NC-LO and FM 1650 PV-LO. It delivers exact concentricity and secure retention for intricate engraving, detailed routing, and small-diameter milling operations.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Small-Diameter Clamping:\u003c\/strong\u003e Custom-sized for 4 mm shank bits to ensure high rotational accuracy and minimal runout.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Standard:\u003c\/strong\u003e Built to exact Mafell specifications for seamless integration with OZ 12 collet holders.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRobust Build:\u003c\/strong\u003e Crafted from wear-resistant alloy steel for extended service life under professional workloads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Mafell OZ 12 Collet Chuck (4 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067950325853,"sku":"ML93828","price":46.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093828_zoom_1920x1920_6f5091b0-2aad-46ad-a4ab-826b847baee6.jpg?v=1791576711"},{"product_id":"mafell-collet-chuck-set-oz-3-mm-93737","title":"Mafell OZ Collet and Nut Set, 3 mm 93737","description":"\u003cp\u003eThe Mafell 093737 collet chuck set includes a precision 3 mm collet and matching union nut designed for Mafell milling motors and edge routers. It provides secure, concentric tool retention for 3 mm shank bits during high-speed routing and milling operations.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise Fit:\u003c\/strong\u003e Securely holds 3 mm shank router bits and milling cutters.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Assembly:\u003c\/strong\u003e Includes both the collet chuck and union nut for immediate installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Original:\u003c\/strong\u003e Genuine Mafell replacement or accessory component ensuring correct fit and reliable concentricity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 3 mm Collet Chuck\u003c\/li\u003e\n  \u003cli\u003e1 x Union Nut\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067951177821,"sku":"ML93737","price":44.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093737_zoom_1920x1920_3c1da324-d8f6-4fda-bb50-d1e622cb8e5c.jpg?v=1791809500"},{"product_id":"mafell-collet-chuck-er-16-a-6-mm-93755","title":"Mafell ER 16 Collet Chuck, 6 mm 93755","description":"\u003cp\u003eThe Mafell 093755 ER 16 Collet Chuck is a genuine replacement and accessory collet designed for compatible Mafell milling motors and edge routers equipped with ER 16 collet systems, such as the FM 1000 PV-ER and FM 1000 NC-ER. Engineered for precision routing, engraving, and milling, this 6 mm collet ensures high concentricity and secure tool retention to minimize runout and maintain finish quality.\u003c\/p\u003e\n\u003cp\u003ePrecision manufacturing and exact tolerance matching help reduce vibration during high-speed operation, supporting consistent performance across wood, plastics, and composite materials.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise Clamping:\u003c\/strong\u003e Engineered to securely grip 6 mm shank router bits and cutting tools with high concentricity.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduced Runout:\u003c\/strong\u003e Helps maintain tight tolerances, smooth surface finishes, and extended tool life during high-RPM milling operations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Mafell Accessory:\u003c\/strong\u003e Designed specifically for ER 16 equipped Mafell milling motors and CNC spindles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e High-grade spring steel construction resists wear under demanding industrial workloads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Collet chuck ER 16 (6 mm diameter)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067951898717,"sku":"ML93755","price":62.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093753-093757_zoom_1920x1920_4d407df6-324f-43d3-ab6d-61e908de81d9.jpg?v=1791809143"},{"product_id":"mafell-collet-chuck-er-16-a-8-mm-93756","title":"Mafell ER 16 Collet Chuck, 8 mm 93756","description":"\u003cp\u003eThe Mafell 093756 ER 16 Collet Chuck is engineered for secure and precise clamping of 8 mm shank routing and milling tools. Compatible with Mafell milling motors like the FM 1000 PV-ER and FM 1000 NC-ER, it provides superior concentricity and gripping power for demanding workshop and CNC portal applications.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Clamping:\u003c\/strong\u003e Engineered to securely grip 8 mm router bits and shank cutters without slipping.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuperior Concentricity:\u003c\/strong\u003e High manufacturing precision reduces runout, extending tool life and improving cut quality.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRigorous Testing:\u003c\/strong\u003e Built to Mafell's strict quality standards for professional performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x ER 16 Collet Chuck 8 mm (093756)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067952455773,"sku":"ML93756","price":62.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093753-093757_zoom_1920x1920_e473533d-9212-4cf3-92f9-d60642845c64.jpg?v=1791809019"},{"product_id":"mafell-collet-chuck-oz-8-a-1-8-3-175-mm-93810","title":"Mafell OZ 8 Collet Chuck, 1\/8 in. 93810","description":"\u003cp\u003eThe Mafell 093810 1\/8 in. OZ 8 6-Spline Collet Chuck is built for high-precision routing and engraving work requiring 1\/8 in. shank bits. It integrates seamlessly with compatible Mafell milling motors and edge routers to ensure tight grip and minimal runout.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMiniature Tooling Support:\u003c\/strong\u003e Accommodates 1\/8 in. shank bits for detailed engraving, inlay, and fine profiling work.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline Interface:\u003c\/strong\u003e Designed for use with 6-spline collet union nuts to provide even clamping pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliable Precision:\u003c\/strong\u003e Maintains high concentricity for consistent results during high-speed routing operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 1\/8 in. OZ 8 6-Spline Collet Chuck (093810)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067952881757,"sku":"ML93810","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093810_0522_zoom_1920x1920_91e34297-55a2-489f-ab4d-3b3e52f2ee6e.jpg?v=1791577808"},{"product_id":"mafell-union-nut-er-16m-93758","title":"Mafell ER 16M Union Nut for Milling Motors 93758","description":"\u003cp\u003eThe Mafell 093758 ER 16M Union Nut is a precision-balanced clamping nut designed for use with Mafell milling motors equipped with ER 16 collet systems, such as the FM 1000 PV-ER and FM 1000 NC-ER. It ensures secure retention of collets and bits during high-speed routing and milling tasks.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBalanced Design:\u003c\/strong\u003e Precision balancing minimizes vibration during high-RPM operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Clamping:\u003c\/strong\u003e Firmly secures ER 16 collets and cutting tools into compatible milling motors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Quality:\u003c\/strong\u003e Genuine Mafell replacement part ensures exact fit and reliable performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x ER 16M Union Nut (093758)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067953012829,"sku":"ML93758","price":57.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093758_zoom_1920x1920_ee994c08-5999-4d91-b2c4-cfb60d00f1b9.jpg?v=1791579527"},{"product_id":"mafell-collet-chuck-oz-a-8-mm-93734","title":"Mafell OZ Collet Chuck, 8 mm 93734","description":"\u003cp\u003eThe Mafell 093734 collet chuck is a standard replacement or additional collet for Mafell milling motors and edge routers using an 8 mm tool shank. It delivers secure clamping force and optimal concentricity for heavy routing and edge finishing applications.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard Fit:\u003c\/strong\u003e Matches the standard 8 mm tool shank size used across compatible Mafell routing systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Clamping:\u003c\/strong\u003e Firmly grips tooling to prevent slippage during high-load operations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Quality:\u003c\/strong\u003e Built to rigorous Mafell manufacturing standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 8 mm Collet Chuck\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067953569885,"sku":"ML93734","price":30.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093734_zoom_1920x1920_4995984e-8f35-4dfc-ad9f-7e5af6a2f0a7.jpg?v=1791809699"},{"product_id":"mafell-collet-chuck-oz-12-a-6-mm-93829","title":"Mafell OZ 12 Collet Chuck, 6 mm 93829","description":"\u003cp\u003eThe Mafell 093829 OZ 12 Collet Chuck is a precision clamping component engineered for compatible Mafell milling motors such as the FM 1650 NC-LO and FM 1650 PV-LO. It accommodates 6 mm shank bits, ensuring reliable tool retention and precise concentricity during fine milling and routing tasks.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Tool Retention:\u003c\/strong\u003e Firmly clamps 6 mm shank tools to minimize vibration and enhance machining precision.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExact OEM Fit:\u003c\/strong\u003e Form-fitted for Mafell milling motors equipped with the OZ 12 collet system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustrial Durability:\u003c\/strong\u003e Constructed from hardened steel to handle continuous high-speed operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Mafell OZ 12 Collet Chuck (6 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067953963101,"sku":"ML93829","price":46.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093829_zoom_1920x1920_0a984d89-4c56-42b8-b179-07652685d668.jpg?v=1791576673"},{"product_id":"mafell-collet-chuck-set-oz-8-6-mm-93826","title":"Mafell OZ 8 Collet Chuck Set, 6 mm 93826","description":"\u003cp\u003eThe Mafell 093826 Collet Chuck Set includes a precision 6 mm collet and matching union nut designed specifically for the Mafell KF 1000 edge router. This complete replacement or auxiliary set ensures proper tool retention and alignment for routing applications.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Assembly Set:\u003c\/strong\u003e Includes both the collet and the matching union nut for immediate installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDedicated Compatibility:\u003c\/strong\u003e Tailored for use with the Mafell KF 1000 edge router using the OZ 8 6-spline system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliable Grip:\u003c\/strong\u003e Firmly secures 6 mm router bits to maintain operational safety and cut accuracy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Collet (OZ 8, 6 mm)\u003c\/li\u003e\n  \u003cli\u003e1 Collet Union Nut\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067954094173,"sku":"ML93826","price":49.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093826_0522_zoom_1920x1920_23528945-d733-409d-a8d3-7fbdf2e1f75e.jpg?v=1791576891"},{"product_id":"mafell-collet-chuck-set-oz-8-1-8-3-175-mm-93817","title":"Mafell OZ 8 Collet Chuck Set, 1\/8 in. 93817","description":"\u003cp\u003eThe Mafell 093817 OZ 8 Collet Chuck Set provides precise 1\/8 in. (3,175 mm) shank tool compatibility for Mafell milling motors and edge routers. Designed for high concentricity and secure clamping, this set includes both the 6-spline collet and the matching collet union nut, ensuring seamless integration with current-generation 6-spline spindles.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Clamping:\u003c\/strong\u003e Engineered for secure, concentric retention of 1\/8 in. shank bits to minimize runout and vibration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Set:\u003c\/strong\u003e Includes both the OZ 8 collet and the dedicated 6-spline collet union nut for straightforward replacement or setup.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline Design:\u003c\/strong\u003e Specifically engineered for modern Mafell 6-spline spindles, ensuring a positive fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x OZ 8 Collet (1\/8 in. \/ 3,175 mm)\u003c\/li\u003e\n  \u003cli\u003e1 x 6-Spline Collet Union Nut\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067954159709,"sku":"ML93817","price":49.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093817_0522_zoom_1920x1920_29d487c2-26db-4cd0-9d2f-61edb1d9b9bb.jpg?v=1791577379"},{"product_id":"mafell-collet-chuck-oz-a-3-mm-93731","title":"Mafell OZ Collet Chuck, 3 mm 93731","description":"\u003cp\u003eThe Mafell 093731 3 mm OZ collet chuck is a factory-original accessory designed for Mafell milling motors and edge routers such as the FM 1000, FM 1000 PV, and KF 1000 series.\u003c\/p\u003e\n\u003cp\u003eBuilt for precision applications like model making, engraving, and detailed slotting, this 4-spline collet holds 3 mm shank tooling firmly in place to reduce vibration and optimize machining accuracy.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise 3 mm Capacity:\u003c\/strong\u003e Securely clamps 3 mm shank bits for fine engraving and intricate milling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow Runout Design:\u003c\/strong\u003e Engineered for high concentricity to enhance surface finish quality and tool life.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Fit:\u003c\/strong\u003e Specifically manufactured to integrate seamlessly with compatible Mafell 4-spline collet systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) Mafell 093731 3 mm OZ Collet Chuck\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067954552925,"sku":"ML93731","price":30.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093731_zoom_1920x1920_f979424a-3b7c-43cd-b7a9-cfdce4fe7d4e.jpg?v=1791810022"},{"product_id":"mafell-collet-a-6-mm-93257","title":"Mafell 6 mm Router Collet 93257","description":"\u003cp\u003eThe Mafell 093257 6 mm Router Collet is engineered for the Mafell LO 65Ec and legacy LO 65E hand routers, allowing the use of metric 6 mm shank router bits for specialized cabinetry and joinery applications.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMetric Tooling Support:\u003c\/strong\u003e Permits the installation of 6 mm shank router bits on compatible Mafell routers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAccurate Clamping:\u003c\/strong\u003e Precision-machined interior profile ensures even clamping pressure and minimal bit runout.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Genuine:\u003c\/strong\u003e Original equipment accessory designed to integrate seamlessly with the router spindle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) 6 mm Router Collet (093257)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067954815069,"sku":"ML93257","price":64.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093270_zoom_1920x1920_7b4ef4ba-9e1d-4e44-b829-bd41f3c85592.jpg?v=1791817568"},{"product_id":"mafell-collet-chuck-oz-12-a-1-4-6-35-mm-93834","title":"Mafell OZ 12 Collet Chuck, 1\/4 in. 93834","description":"\u003cp\u003eThe Mafell 093834 OZ 12 Collet Chuck is a precision clamping component designed for Mafell milling motors featuring the OZ 12 spindle system. Built to securely hold routing and engraving tools with 1\/4 in. shanks, this collet delivers exceptional concentricity and clamping force for precise woodworking, template milling, and detailed sign-making applications.\u003c\/p\u003e\n\u003cp\u003eRigorous manufacturing tolerances ensure low runout and vibration reduction, supporting fine detail work and smooth surface finishes at high rotational speeds.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Concentricity:\u003c\/strong\u003e Precision machining ensures minimal runout for precise routing, profiling, and engraving tasks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure Shank Retention:\u003c\/strong\u003e Firmly grips 1\/4 in. tool shanks to prevent slippage during high-speed feed rates.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Direct replacement or accessory collet for Mafell milling motors utilizing the OZ 12 collet standard.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Build:\u003c\/strong\u003e Hardened steel construction designed to endure continuous professional use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Mafell OZ 12 Collet Chuck, 1\/4 in. (093834)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067956158557,"sku":"ML93834","price":46.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093834_zoom_1920x1920_3dcf2b79-ad3b-46b6-a55f-e694c66004c9.jpg?v=1791576049"},{"product_id":"mafell-collet-chuck-oz-12-a-8-mm-93830","title":"Mafell OZ 12 Collet Chuck, 8 mm 93830","description":"\u003cp\u003eThe Mafell 093830 OZ 12 Collet Chuck is a precision-engineered clamping tool designed for compatible Mafell milling motors, including the FM 1650 NC-LO and FM 1650 PV-LO series. It securely holds 8 mm router bits and cutting tools with high concentricity for demanding routing and milling applications.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Clamping:\u003c\/strong\u003e Engineered to securely grip 8 mm shank tooling, maintaining tight runout tolerances for accurate milling results.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Compatibility:\u003c\/strong\u003e Specifically designed for Mafell OZ 12 collet systems used in high-performance milling motors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Manufactured from high-grade alloy steel to withstand high rotational speeds and rigorous industrial use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Mafell OZ 12 Collet Chuck (8 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067956420701,"sku":"ML93830","price":46.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093830_zoom_1920x1920_c5e78449-323c-4620-8e67-40b5d280e421.jpg?v=1791576583"},{"product_id":"mafell-collet-chuck-oz-8-a-2-mm-93819","title":"Mafell OZ 8 Collet Chuck, 2 mm 93819","description":"\u003cp\u003eThe Mafell 093819 OZ 8 Router Collet accommodates ultra-fine 2 mm shank tooling for high-precision micro-milling, engraving, and specialized industrial applications. Built to exacting factory standards, this collet ensures minimal runout and a secure grip when paired with compatible Mafell milling motors and edge routers.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro Tool Capacity:\u003c\/strong\u003e Specifically sized for 2 mm shank bits used in intricate engraving, PCB work, and fine model making.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStrict Concentricity:\u003c\/strong\u003e Minimizes vibration and tool deflection to safeguard fragile micro-tooling during operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline Configuration:\u003c\/strong\u003e Engineered for seamless compatibility with 6-spline Mafell union nuts and tool spindles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 2 mm OZ 8 Collet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067957698653,"sku":"ML93819","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093819_0522_zoom_1920x1920_de79d8e0-b328-4de1-8ab4-7e69e47d2738.jpg?v=1791577088"},{"product_id":"mafell-collet-chuck-oz-12-a-3-mm-93827","title":"Mafell OZ 12 Collet Chuck, 3 mm 93827","description":"\u003cp\u003eThe Mafell 093827 OZ 12 Collet Chuck is engineered for ultra-fine routing and engraving work requiring 3 mm shank bits. Designed for compatibility with Mafell milling motors like the FM 1650 NC-LO and FM 1650 PV-LO, this collet chuck ensures exceptional concentricity and secure tool clamping.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro-Tool Clamping:\u003c\/strong\u003e Securely accommodates 3 mm shank bits for delicate detail work and precision engraving.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Concentricity:\u003c\/strong\u003e Minimizes tool wobble and vibration to produce clean, accurate cuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional Quality:\u003c\/strong\u003e Manufactured from high-grade materials to meet rigorous industrial standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Mafell OZ 12 Collet Chuck (3 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067960385629,"sku":"ML93827","price":46.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093827_zoom_1920x1920_e0b864c5-1881-43e3-8ed2-d964da2c27cf.jpg?v=1791576821"},{"product_id":"mafell-collet-chuck-oz-8-a-5-mm-93820","title":"Mafell OZ 8 Collet Chuck, 5 mm 93820","description":"\u003cp\u003eThe Mafell 093820 OZ 8 Router Collet is designed to securely hold 5 mm shank tooling in compatible Mafell milling motors and edge routers. Providing high concentricity and precise clamping force, it is ideal for fine detail work, intricate engraving, model making, and small-diameter milling operations.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFine Tool Holding:\u003c\/strong\u003e Precision-engineered to accommodate 5 mm shank bits securely without slipping or excessive runout.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow Runout Design:\u003c\/strong\u003e Maintains strict concentricity to protect delicate bits and ensure clean, accurate cuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Spline System:\u003c\/strong\u003e Compatible with 6-spline union nuts on designated Mafell milling motors and routers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 5 mm OZ 8 Collet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":45067963105373,"sku":"ML93820","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/093820_0522_zoom_1920x1920_dc4d5a07-ac28-41b8-9e79-d3f26f92c2a2.jpg?v=1791577017"}],"url":"https:\/\/beavertools.com\/collections\/mafell-routers-and-sanders.oembed?page=2","provider":"Beaver Industrial Supply","version":"1.0","type":"link"}