{"title":"Metalworking USA Bullet Bench Vises","description":"\u003cp\u003eThe Wilton Bullet Vise family has improved over the years but has always maintained the same high quality and integrity since 1941. This trademarked design has proven its superiority for over 70 years - the patented bullet design is fully enclosed to protect internal components and keep out dust and debris extending the life of the vise. Wilton Bullet Vises are proudly built in the USA.\u003c\/p\u003e","products":[{"product_id":"28806-wilton-tradesman-vise-5-1-2-jaw-width-5-jaw-opening-3-3-4-throat-depth","title":"Jet 1755, Tradesman 5-1\/2 in. Round Channel Vise with Swivel Base 28806","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003e28806, Wilton Tradesman Vise, 5-1\/2\" Jaw Width, 5\" Jaw Opening, 3-3\/4\" Throat Depth\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Wilton® bench Vise family has improved over the years, but has always maintained the same high quality and integrity since 1941.  Wilton is now pleased to introduce a new and improved version of our number one selling vise – the Tradesman Bullet vise.\u003c\/p\u003e\n\u003cp\u003eUnlike most vises that have a fixed center nut the Tradesman spindle nut is anchored at the rear. This decreases backlash and increases clamping force while significantly increasing product life. The round channel design allows for a completely enclosed spindle assembly, keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the Tradesman vise is equipped with replaceable serrated jaw inserts, pipe jaws and a machined striking anvil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWider jaws provide greater clamping surface \u003c\/li\u003e\n\u003cli\u003eFully enclosed spindle and nut increases the life of the vise \u003c\/li\u003e\n\u003cli\u003eLarge anvil work surface \u003c\/li\u003e\n\u003cli\u003ePrecision turned sidebar \u003c\/li\u003e\n\u003cli\u003e360° swivel base with double lockdowns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJaw Width (In.) 5-1\/2\u003c\/li\u003e\n\u003cli\u003eOpening Capacity Max (In.) 5\u003c\/li\u003e\n\u003cli\u003eThroat Depth (In.) 3-3\/4\u003c\/li\u003e\n\u003cli\u003ePipe Jaw Capacity (In.) 1\/4 - 3\u003c\/li\u003e\n\u003cli\u003eType of Base 360 Degree Swivel\u003c\/li\u003e\n\u003cli\u003eJaw Depth (In.) 1\/2\u003c\/li\u003e\n\u003cli\u003eJaw Height (In.) 3\/4\u003c\/li\u003e\n\u003cli\u003ePipe Jaw # 2904200\u003c\/li\u003e\n\u003cli\u003eSerrated Jaw Inserts # 2908070\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWilton Lifetime Warranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWilton warrants every product they sell against manufacturers’ defects. If one of Wilton tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/bisjettools.com\/banners\/jet\/warranty\/wilton_lifetime.png\" width=\"80\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ciframe width=\"600\" height=\"355\" src=\"https:\/\/www.youtube.com\/embed\/9VXhxpuhgjc\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153314771037,"sku":"JT28806","price":621.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/28806_alt1.jpg?v=1769410072"},{"product_id":"28807-wilton-tradesman-vise-6-1-2","title":"Jet 1765, Tradesman 6-1\/2 in. Round Channel Vise with Swivel Base 28807","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003e28807, Wilton TRADESMAN VISE 6-1\/2\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Wilton® bench Vise family has improved over the years, but has always maintained the same high quality and integrity since 1941. Wilton is now pleased to introduce a new and improved version of our number one selling vise – the Tradesman Bullet vise.\u003c\/p\u003e\n\u003cp\u003eUnlike most vises that have a fixed center nut the Tradesman spindle nut is anchored at the rear. This decreases backlash and increases clamping force while significantly increasing product life. The round channel design allows for a completely enclosed spindle assembly, keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the Tradesman vise is equipped with replaceable serrated jaw inserts, pipe jaws and a machined striking anvil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e \u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e  Fully Sealed one-piece Spindle Nut Assembly\u003c\/li\u003e\n\u003cli\u003e  Redesigned Spindle Assembly with Replaceable Tommy Bar\u003c\/li\u003e\n\u003cli\u003e  Precision Machined Slide Bar\u003c\/li\u003e\n\u003cli\u003e  Machined Steel Serrated Jaws with Black Phosphate Coating\u003c\/li\u003e\n\u003cli\u003e  60,000 psi Ductile Iron Body, Movable Jaw \u0026amp; Base\u003c\/li\u003e\n\u003cli\u003e  Oversized Anvil\u003c\/li\u003e\n\u003cli\u003e  360° Swivel Base with Double Lockdowns\u003c\/li\u003e\n\u003cli\u003e  Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153314803805,"sku":"JT28807","price":929.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/28807_alt3.jpg?v=1769410072"},{"product_id":"28827-wilton-c2-combination-pipe-and-bench-5in-jaw-round-channel-vise-with-swivel-base","title":"Jet C2, Combination Pipe and Bench 5 in. Jaw Round Channel Vise with Swivel Base 28827","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003e28827, Wilton, C2 Combination Pipe and Bench 5in Jaw Round Channel Vise with Swivel Base\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Combination Pipe and Bench round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut, the Combination Pipe and Bench round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the Combination Pipe and Bench vise is equipped with main jaws, pipe jaws and a machined anvil work surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"cat-detail\"\u003e\n\u003cdiv class=\"cat-detail\"\u003e\n\u003cul\u003e\n\u003cli\u003eMassive cast iron vise body is virtually indestructible, weighing up to 30% more than competing models\u003c\/li\u003e\n\u003cli\u003eSealed construction keeps lubrication in and contaminants out for a lifetime of smooth operation\u003c\/li\u003e\n\u003cli\u003ePrecision slide bar eliminates movement in the front jaw regardless of opened distance\u003c\/li\u003e\n\u003cli\u003eLonger spindle nut ensures smooth movement and a stronger straight-line pull\u003c\/li\u003e\n\u003cli\u003eHardened steel replaceable jaw inserts are machine serrated for a safe and secure grip under maximum torque\u003c\/li\u003e\n\u003cli\u003eSelf-centering pipe jaws hold up to 2.5\" pipe safely and securely\u003c\/li\u003e\n\u003cli\u003eLarge anvil designed to take a beating while forming and shaping materials\u003c\/li\u003e\n\u003cli\u003eLocking swivel base with double lockdowns for non-slip hold in any position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"prod-header-title\"\u003e\u003cstrong\u003e\u003cspan id=\"ctl00_ContentPlaceHolder1_lblIdeal\"\u003eIdeal For:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"cat-detail\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy Construction\u003c\/li\u003e\n\u003cli\u003eMechanical Trades\u003c\/li\u003e\n\u003cli\u003eOil Field Service\u003c\/li\u003e\n\u003cli\u003ePlant Maintenance\u003c\/li\u003e\n\u003cli\u003eSteel Fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"specrow\"\u003e\n\u003cdiv class=\"specleft specgrey\"\u003e\n\u003cul\u003e\n\u003cli\u003eJaw Width (In.) 5\u003c\/li\u003e\n\u003cli\u003eOpening Capacity Max (In.) 7-7\/8\u003c\/li\u003e\n\u003cli\u003eThroat Depth (In.) 5-1\/2\u003c\/li\u003e\n\u003cli\u003ePipe Jaw Capacity (In.) 3\/8 - 4-1\/2\u003c\/li\u003e\n\u003cli\u003eType of Base 360 Degree Swivel\u003c\/li\u003e\n\u003cli\u003eCenter Distance (In.) 2-3\/8\u003c\/li\u003e\n\u003cli\u003eJaw Depth (In.) 5\/8\u003c\/li\u003e\n\u003cli\u003eJaw Height (In.) 1\u003c\/li\u003e\n\u003cli\u003ePipe Jaw # 2900830\u003c\/li\u003e\n\u003cli\u003eSerrated Jaw Inserts # 2903240\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153315524701,"sku":"JT28827","price":1618.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/3636536_1.png?v=1769410074"},{"product_id":"28825-wilton-c0-combination-pipe-and-bench-3-1-2-jaw-round-channel-vise-with-swivel-base","title":"Jet C0, Combination Pipe And Bench 3-1\/2 in. Jaw Round Channel Vise with Swivel Base 28825","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003e28825, Wilton, C0 Combination Pipe and Bench 3-1\/2” Jaw Round Channel Vise with Swivel Base\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Combination Pipe and Bench round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut, the Combination Pipe and Bench round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the Combination Pipe and Bench vise is equipped with main jaws, pipe jaws and a machined anvil work surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"cat-detail\"\u003e\n\u003cul\u003e\n\u003cli\u003eMassive cast iron vise body is virtually indestructible, weighing up to 30% more than competing models\u003c\/li\u003e\n\u003cli\u003eSealed construction keeps lubrication in and contaminants out for a lifetime of smooth operation\u003c\/li\u003e\n\u003cli\u003ePrecision slide bar eliminates movement in the front jaw regardless of opened distance\u003c\/li\u003e\n\u003cli\u003eLonger spindle nut ensures smooth movement and a stronger straight-line pull\u003c\/li\u003e\n\u003cli\u003eHardened steel replaceable jaw inserts are machine serrated for a safe and secure grip under maximum torque\u003c\/li\u003e\n\u003cli\u003eSelf-centering pipe jaws hold up to 2.5\" pipe safely and securely\u003c\/li\u003e\n\u003cli\u003eLarge anvil designed to take a beating while forming and shaping materials\u003c\/li\u003e\n\u003cli\u003eLocking swivel base with double lockdowns for non-slip hold in any position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"prod-header-title\"\u003e\u003cstrong\u003e\u003cspan id=\"ctl00_ContentPlaceHolder1_lblIdeal\"\u003eIdeal For:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"cat-detail\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy Construction\u003c\/li\u003e\n\u003cli\u003eMechanical Trades\u003c\/li\u003e\n\u003cli\u003eOil Field Service\u003c\/li\u003e\n\u003cli\u003ePlant Maintenance\u003c\/li\u003e\n\u003cli\u003eSteel Fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"specrow\"\u003e\n\u003cdiv class=\"specleft specgrey\"\u003e\n\u003cul\u003e\n\u003cli\u003eJaw Width (In.) 3-1\/2\u003c\/li\u003e\n\u003cli\u003eOpening Capacity Max (In.) 5\u003c\/li\u003e\n\u003cli\u003eThroat Depth (In.) 4-1\/2\u003c\/li\u003e\n\u003cli\u003ePipe Jaw Capacity (In.) 1\/4 - 2-1\/2\u003c\/li\u003e\n\u003cli\u003eType of Base 360 Degree Swivel\u003c\/li\u003e\n\u003cli\u003eCenter Distance (In.) 2-3\/8\u003c\/li\u003e\n\u003cli\u003eJaw Depth (In.) 5\/8\u003c\/li\u003e\n\u003cli\u003eJaw Height (In.) 1\u003c\/li\u003e\n\u003cli\u003ePipe Jaw # 2908050\u003c\/li\u003e\n\u003cli\u003eSerrated Jaw Inserts # 2904960\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153315688541,"sku":"JT28825","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/3636536.png?v=1769410075"},{"product_id":"28832-wilton-500s-machinists-bench-vise-swivel-base-5in-jaw-width-8in-jaw-opening-4-1-2in-throat-depth","title":"Jet 500S Machinist 5 in. Jaw Round Channel Vise with Swivel Base 28832","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003e28832, Wilton 500S, Machinists' Bench Vise, Swivel Base, 5in Jaw Width, 8in Jaw Opening, 4-1\/2in Throat Depth \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Machinist round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Machinist round channel vise nut is anchored at the rear. This rear anchored nut provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly. This enclosure keeps debris out and lubrication in for a lifetime of smooth operation. The Machinist vise is equipped with main jaws and a machined anvil work surface. The main jaws are made from high strength steel and are fully replaceable. The Machinist vise is also equipped with a swivel base with dual locking nuts. The open locking design of the Machinist base allows for a full 360 degrees of rotation. To prevent rotation during use both the locking nuts and base have serrated edges that interact positively to assure a non-slip grip when tightened. The main base has four pre-cast holes for mounting the vise to a work surface. Each vise includes a mounting template for quick no guess hole placement for mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel jaw, replaceable inserts are machine serrated for safe, sure grip under maximum torque\u003c\/li\u003e\n\u003cli\u003eExtra deep throat design gives you more working room where it counts\u003c\/li\u003e\n\u003cli\u003eEnclosed design keeps lubrication in and contaminants out for smooth operation\u003c\/li\u003e\n\u003cli\u003eLocking swivel base and 360° rotation is enhanced by serrated swivel base with double lockdowns for non-slip holding and four mounting posts\u003c\/li\u003e\n\u003cli\u003eLarge anvil work surface\u003c\/li\u003e\n\u003cli\u003eDesigned to handle the most demanding clamping applications\u003c\/li\u003e\n\u003cli\u003eAnchored at the rear to provide straight line pull and even pressure resulting in greater durability\u003c\/li\u003e\n\u003cli\u003eRound channel design allows for a completely enclosed spindle and nut assembly\u003c\/li\u003e\n\u003cli\u003eEnclosure keeps debris out and lubrication in for a lifetime of smooth operation\u003c\/li\u003e\n\u003cli\u003eEquipped with main jaws and a machined anvil work surface\u003c\/li\u003e\n\u003cli\u003eMain jaws are made from high strength steel and are fully replaceable\u003c\/li\u003e\n\u003cli\u003eDual locking nuts\u003c\/li\u003e\n\u003cli\u003eOpen locking base design allows for a full 360 degrees of rotation\u003c\/li\u003e\n\u003cli\u003e4 pre-cast holes for mounting the vise to a work surface.\u003c\/li\u003e\n\u003cli\u003eEach vise includes a mounting template for quick no-guess hole placement for mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType Swivel\u003c\/li\u003e\n\u003cli\u003eJaw Width (In.) 5\u003c\/li\u003e\n\u003cli\u003eOpening Capacity Max (In.) 8\u003c\/li\u003e\n\u003cli\u003eThroat Depth (In.) 4-1\/2\u003c\/li\u003e\n\u003cli\u003eType of Base 360 Degree Swivel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153315786845,"sku":"JT28832","price":1579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/10006_main_3.jpg?v=1769410078"},{"product_id":"28805-wilton-tradesman-vise-4-1-2-jaw-width-4-jaw-opening-3-1-4-throat-depth","title":"Jet 1745, Tradesman 4-1\/2 in. Round Channel Vise with Swivel Base 28805","description":"\u003cp\u003e\u003cstrong\u003e28805, Wilton Tradesman Vise , 4-1\/2\" Jaw Width, 4\" Jaw Opening, 3-1\/4\" Throat Depth\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProudly made in the USA, the Tradesman round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Tradesman round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the Tradesman vise is equipped with main jaws, pipe jaws and a machined anvil work surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWider Jaws provide greater clamping surface \u003c\/li\u003e\n\u003cli\u003eFully enclosed spindle and nut increases the life of the vise \u003c\/li\u003e\n\u003cli\u003eLarge anvil work surface \u003c\/li\u003e\n\u003cli\u003ePrecision turned sidebar \u003c\/li\u003e\n\u003cli\u003e360° swivel base with double lockdowns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJaw Width (In.) 4-1\/2\u003c\/li\u003e\n\u003cli\u003eOpening Capacity Max (In.) 4\u003c\/li\u003e\n\u003cli\u003eThroat Depth (In.) 3-1\/4\u003c\/li\u003e\n\u003cli\u003ePipe Jaw Capacity (In.) 1\/4 - 2-1\/2\u003c\/li\u003e\n\u003cli\u003eType of Base 360 Degree Swivel\u003c\/li\u003e\n\u003cli\u003eJaw Depth (In.) 1\/2\u003c\/li\u003e\n\u003cli\u003eJaw Height (In.) 3\/4\u003c\/li\u003e\n\u003cli\u003ePipe Jaw # 2904200\u003c\/li\u003e\n\u003cli\u003eSerrated Jaw Inserts # 2908060\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWilton Lifetime Warranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWilton warrants every product they sell against manufacturers’ defects. If one of Wilton tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/bisjettools.com\/banners\/jet\/warranty\/wilton_lifetime.png\" alt=\"\" width=\"80\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ciframe width=\"600\" height=\"355\" src=\"https:\/\/www.youtube.com\/embed\/9VXhxpuhgjc\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153315852381,"sku":"JT28805","price":669.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/28805_alt1.jpg?v=1769410078"},{"product_id":"28830-wilton-300s-machinists-bench-vises-swivel-base-3-jaw-width-4-3-4-jaw-opening-2-5-8-throat-depth","title":"Jet 300S Machinist 3 in. Jaw Round Channel Vise with Swivel Base 28830","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003e28830, Wilton 300S, Machinists' Bench Vises - Swivel Base, 3\" Jaw Width, 4-3\/4\" Jaw Opening, 2-5\/8\" Throat Depth\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Machinist round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Machinist round channel vise nut is anchored at the rear. This rear anchored nut provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly. This enclosure keeps debris out and lubrication in for a lifetime of smooth operation. The Machinist vise is equipped with main jaws and a machined anvil work surface. The main jaws are made from high strength steel and are fully replaceable. The Machinist vise is also equipped with a swivel base with dual locking nuts. The open locking design of the Machinist base allows for a full 360 degrees of rotation. To prevent rotation during use both the locking nuts and base have serrated edges that interact positively to assure a non-slip grip when tightened. The main base has four pre-cast holes for mounting the vise to a work surface. Each vise includes a mounting template for quick no guess hole placement for mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel jaw, replaceable inserts are machine serrated for safe, sure grip under maximum torque \u003c\/li\u003e\n\u003cli\u003eExtra deep throat - this design gives you more working room where it counts \u003c\/li\u003e\n\u003cli\u003eEnclosed design keeps lubrication in and contaminants out for smooth operation \u003c\/li\u003e\n\u003cli\u003eLocking swivel base - 360° rotation is enhanced by serrated swivel base with double lockdowns for non-slip holding and four mounting posts \u003c\/li\u003e\n\u003cli\u003eLarge anvil work surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 6.7 Inch\u003c\/li\u003e\n\u003cli\u003eWidth: 6.8 Inches\u003c\/li\u003e\n\u003cli\u003eLength: 15.2 Inches\u003c\/li\u003e\n\u003cli\u003eJaw Depth: 1\/2 Inch\u003c\/li\u003e\n\u003cli\u003eJaw Height: 3\/4 Inch\u003c\/li\u003e\n\u003cli\u003eJaw Width: 3 Inch\u003c\/li\u003e\n\u003cli\u003eOpening Capacity Maximum: 4-3\/4 Inches\u003c\/li\u003e\n\u003cli\u003eThroat Depth: 2-5\/8 Inch\u003c\/li\u003e\n\u003cli\u003eType of Base: 360 Degrees Swivel\u003c\/li\u003e\n\u003cli\u003eType of Nut: Straight Line Pull\u003c\/li\u003e\n\u003cli\u003eCenter Distance: 2 Inches\u003c\/li\u003e\n\u003cli\u003eBolt Circle Diameter: 6-3\/8 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153315917917,"sku":"JT28830","price":530.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/10006_main.jpg?v=1769410078"},{"product_id":"28831-jet-machinist-4-jaw-round-channel-vise-with-swivel-base","title":"Jet 400S Machinist 4 in. Jaw Round Channel Vise with Swivel Base 28831","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cstrong\u003e28831, Jet Machinist 4” Jaw Round Channel Vise with Swivel Base\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProudly made in the USA, the Machinist round channel vise is designed to handle the most demanding clamping applications.  Unlike most vises that have a fixed center nut, the Machinist vise vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability.  The round channel design also allows for a completely enclosed spindle and nut assembly keeping debris out and lubrication in for a lifetime of smooth operation.  The Machinist vise is also equipped with main jaws and a machined anvil work surface.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMassive cast iron vise body is virtually indestructible, weighing up to 30% more than competing models\u003c\/li\u003e\n\u003cli\u003eSealed construction keeps lubrication in and contaminants out for a lifetime of smooth operation\u003c\/li\u003e\n\u003cli\u003ePrecision slide bar eliminates movement in the front jaw regardless of opened distance\u003c\/li\u003e\n\u003cli\u003eLonger spindle nut ensures smooth movement and a stronger straight-line pull\u003c\/li\u003e\n\u003cli\u003eHardened steel replaceable jaw inserts are machine serrated for a safe and secure grip under maximum torque\u003c\/li\u003e\n\u003cli\u003eLarge anvil designed to take a beating while forming and shaping materials\u003c\/li\u003e\n\u003cli\u003eLocking swivel base with double lockdowns for non-slip hold in any position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJaw Width (In.)\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Capacity Max (In.)\u003c\/td\u003e\n\u003ctd\u003e6-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThroat Depth (In.)\u003c\/td\u003e\n\u003ctd\u003e3-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType of Base\u003c\/td\u003e\n\u003ctd\u003e360 Degree Swivel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e1.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e63.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e1.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153316704349,"sku":"JT28831","price":830.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/28831-jet-p1.jpg?v=1769410082"},{"product_id":"28828-wilton-c3-combination-pipe-and-bench-6in-jaw-round-channel-vise-with-swivel-base","title":"Jet C3, Combination Pipe And Bench 6 in. Jaw Round Channel Vise with Swivel Base 28828","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003e28828, Wilton, C3 Combination Pipe And Bench 6in Jaw Round Channel Vise with Swivel Base\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Combination Pipe and Bench round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut, the Combination Pipe and Bench round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the Combination Pipe and Bench vise is equipped with main jaws, pipe jaws and a machined anvil work surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"cat-detail\"\u003e\n\u003cdiv class=\"cat-detail\"\u003e\n\u003cul\u003e\n\u003cli\u003eMassive cast iron vise body is virtually indestructible, weighing up to 30% more than competing models\u003c\/li\u003e\n\u003cli\u003eSealed construction keeps lubrication in and contaminants out for a lifetime of smooth operation\u003c\/li\u003e\n\u003cli\u003ePrecision slide bar eliminates movement in the front jaw regardless of opened distance\u003c\/li\u003e\n\u003cli\u003eLonger spindle nut ensures smooth movement and a stronger straight-line pull\u003c\/li\u003e\n\u003cli\u003eHardened steel replaceable jaw inserts are machine serrated for a safe and secure grip under maximum torque\u003c\/li\u003e\n\u003cli\u003eSelf-centering pipe jaws hold up to 2.5\" pipe safely and securely\u003c\/li\u003e\n\u003cli\u003eLarge anvil designed to take a beating while forming and shaping materials\u003c\/li\u003e\n\u003cli\u003eLocking swivel base with double lockdowns for non-slip hold in any position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"prod-header-title\"\u003e\u003cstrong\u003e\u003cspan id=\"ctl00_ContentPlaceHolder1_lblIdeal\"\u003eIdeal For:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"cat-detail\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy Construction\u003c\/li\u003e\n\u003cli\u003eMechanical Trades\u003c\/li\u003e\n\u003cli\u003eOil Field Service\u003c\/li\u003e\n\u003cli\u003ePlant Maintenance\u003c\/li\u003e\n\u003cli\u003eSteel Fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"specrow\"\u003e\n\u003cdiv class=\"specleft specgrey\"\u003e\n\u003cul\u003e\n\u003cli\u003eJaw Width (In.) 6\u003c\/li\u003e\n\u003cli\u003eOpening Capacity Max (In.) 10-1\/4\u003c\/li\u003e\n\u003cli\u003eThroat Depth (In.) 6-1\/2\u003c\/li\u003e\n\u003cli\u003ePipe Jaw Capacity (In.) 1\/2 - 6\u003c\/li\u003e\n\u003cli\u003eType of Base 360 Degree Swivel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153316835421,"sku":"JT28828","price":2370.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/3636536_1_1.png?v=1769410083"},{"product_id":"28833-wilton-600s-machinists-bench-vises-swivel-base-6-jaw-width-10-jaw-opening-5-1-2-throat-depth","title":"Jet 600S Machinist 6 in. Jaw Round Channel Vise with Swivel Base 28833","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003e28833, Wilton 600S, Machinists' Bench Vises - Swivel Base, 6\" Jaw Width, 10\" Jaw Opening, 5-1\/2\" Throat Depth\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Machinist round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Machinist round channel vise nut is anchored at the rear. This rear anchored nut provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly. This enclosure keeps debris out and lubrication in for a lifetime of smooth operation. The Machinist vise is equipped with main jaws and a machined anvil work surface. The main jaws are made from high strength steel and are fully replaceable. The Machinist vise is also equipped with a swivel base with dual locking nuts. The open locking design of the Machinist base allows for a full 360 degrees of rotation. To prevent rotation during use both the locking nuts and base have serrated edges that interact positively to assure a non-slip grip when tightened. The main base has four pre-cast holes for mounting the vise to a work surface. Each vise includes a mounting template for quick no guess hole placement for mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel jaw, replaceable inserts are machine serrated for safe, sure grip under maximum torque\u003c\/li\u003e\n\u003cli\u003eExtra deep throat design gives you more working room where it counts\u003c\/li\u003e\n\u003cli\u003eEnclosed design keeps lubrication in and contaminants out for smooth operation\u003c\/li\u003e\n\u003cli\u003eLocking swivel base and 360° rotation is enhanced by serrated swivel base with double lockdowns for non-slip holding and four mounting posts\u003c\/li\u003e\n\u003cli\u003eLarge anvil work surface\u003c\/li\u003e\n\u003cli\u003eDesigned to handle the most demanding clamping applications\u003c\/li\u003e\n\u003cli\u003eAnchored at the rear to provide straight line pull and even pressure resulting in greater durability\u003c\/li\u003e\n\u003cli\u003eRound channel design allows for a completely enclosed spindle and nut assembly\u003c\/li\u003e\n\u003cli\u003eEnclosure keeps debris out and lubrication in for a lifetime of smooth operation\u003c\/li\u003e\n\u003cli\u003eEquipped with main jaws and a machined anvil work surface\u003c\/li\u003e\n\u003cli\u003eMain jaws are made from high strength steel and are fully replaceable\u003c\/li\u003e\n\u003cli\u003eDual locking nuts\u003c\/li\u003e\n\u003cli\u003eOpen locking base design allows for a full 360 degrees of rotation\u003c\/li\u003e\n\u003cli\u003e4 pre-cast holes for mounting the vise to a work surface\u003c\/li\u003e\n\u003cli\u003eEach vise includes a mounting template for quick no-guess hole placement for mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 15.5 Inch\u003c\/li\u003e\n\u003cli\u003eWidth: 11.9 Inches\u003c\/li\u003e\n\u003cli\u003eLength: 26.3 Inch\u003c\/li\u003e\n\u003cli\u003eJaw Depth: 1 Inch\u003c\/li\u003e\n\u003cli\u003eJaw Height: 1-1\/2 Inches\u003c\/li\u003e\n\u003cli\u003eJaw Width: 6 Inches\u003c\/li\u003e\n\u003cli\u003eOpening Capacity Maximum: 10 Inch\u003c\/li\u003e\n\u003cli\u003eThroat Depth: 5-1\/2 Inches\u003c\/li\u003e\n\u003cli\u003eType of Base: 360 Degrees Swivel\u003c\/li\u003e\n\u003cli\u003eType of Nut: Straight Line Pull\u003c\/li\u003e\n\u003cli\u003eCenter Distance: 4 Inches\u003c\/li\u003e\n\u003cli\u003eBolt Circle Diameter: 9-3\/4 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153316999261,"sku":"JT28833","price":1729.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/28833_main.jpg?v=1769410083"},{"product_id":"28826-wilton-c1-combo-pipe-and-bench-vise-4-1-2-jaw-width","title":"Jet C1, Combination Pipe and Bench 4-1\/2 in. Jaw Round Channel Vise with Swivel Base 28826","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003e28826, Wilton C1 Combo Pipe and Bench Vise 4-1\/2\" Jaw Width\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe All-Weather round channel vise is designed to handle the most demanding clamping applications indoors and outdoors. Unlike most vises that have a fixed center nut, the All-Weather round channel vise nut is anchored in the rear. This rear anchored nut provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly. This enclosure keeps debris out and lubrication in for a lifetime of smooth operation. The All-Weather vise is equipped with nickel plated jaws, pipe jaws, spindle and locknuts. The self-centering pipe jaws are grooved to prevent rotation of round stock and have a two step design to assure a firm hold on both large and small diameter material. The All-Weather vise is also equipped with a swivel base with dual locking nuts. The open locking design of the All-Weather base allows for a full 360 degrees of rotation. To prevent rotation during use both the locking nuts and base have serrated edges that interact positively to assure a non-slip grip when tightened. The main base has four pre-cast holes for mounting the vise to a work surface. Each vise includes a mounting template for quick no guess hole placement for mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-centering nickel plated pipe jaws-hold up to 3-1\/2\" pipe safely and securely\u003c\/li\u003e\n\u003cli\u003eNickel plated jaw inserts-machine serrated, replaceable jaws assure a positive hold\u003c\/li\u003e\n\u003cli\u003eEnclosed construction keeps lubrication in and contaminants out. Perfect for outdoor use\u003c\/li\u003e\n\u003cli\u003eLocking swivel base with double lockdowns for non-slip hold in any position\u003c\/li\u003e\n\u003cli\u003eAlloy steel slide bar for added strength and keyed for a precision fit\u003c\/li\u003e\n\u003cli\u003eLarge anvil work surface\u003c\/li\u003e\n\u003cli\u003eDesigned to handle the most demanding clamping applications indoors and outdoors\u003c\/li\u003e\n\u003cli\u003eAnchored at the rear to provide straight line pull and even pressure resulting in greater durability\u003c\/li\u003e\n\u003cli\u003eRound channel design allows for a completely enclosed spindle and nut assembly, which keeps debris out and lubrication in for a lifetime of smooth operation\u003c\/li\u003e\n\u003cli\u003eEquipped with nickel plated jaws, pipe jaws, spindle and locknuts\u003c\/li\u003e\n\u003cli\u003eSelf-centering pipe jaws are grooved to prevent rotation of round stock and have a 2-step design to assure a firm hold on both large and small diameter material\u003c\/li\u003e\n\u003cli\u003eMain and pipe jaws made from high strength steel and are fully replaceable\u003c\/li\u003e\n\u003cli\u003eSwivel base has dual locking nuts\u003c\/li\u003e\n\u003cli\u003eOpen locking design of base allows for a full 360 degrees of rotation\u003c\/li\u003e\n\u003cli\u003eMain base has 4 pre-cast holes for mounting the vise to a work surface.\u003c\/li\u003e\n\u003cli\u003eEach vise includes a mounting template for quick no guess hole placement for mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 10.5 Inches\u003c\/li\u003e\n\u003cli\u003eWidth: 8.9 Inch\u003c\/li\u003e\n\u003cli\u003eLength: 20 Inches\u003c\/li\u003e\n\u003cli\u003eJaw Depth: 5\/8 Inch\u003c\/li\u003e\n\u003cli\u003eJaw Height: 1-1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eJaw Width: 4-1\/2 Inch\u003c\/li\u003e\n\u003cli\u003eOpening Capacity Maximum: 6 Inches\u003c\/li\u003e\n\u003cli\u003ePipe Jaw Capacity: 1\/8 to 3-1\/2 Inches\u003c\/li\u003e\n\u003cli\u003eThroat Depth: 4-3\/4 Inches\u003c\/li\u003e\n\u003cli\u003eType of Base: 360 Degrees Swivel\u003c\/li\u003e\n\u003cli\u003eType of Nut: Straight Line Pull\u003c\/li\u003e\n\u003cli\u003eCenter Distance: 2-3\/8 Inch\u003c\/li\u003e\n\u003cli\u003eType of Nut: Straight Line Pull\u003c\/li\u003e\n\u003cli\u003eCenter Distance: 2-3\/8 Inches\u003c\/li\u003e\n\u003cli\u003eBolt Circle Diameter: 8-3\/4 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153317064797,"sku":"JT28826","price":1459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/10225_main_4_1.jpg?v=1769410085"},{"product_id":"28808-wilton-tradesman-8in-round-channel-vise-with-swivel-base","title":"Jet 1780A, Tradesman 8 in. Round Channel Vise with Swivel Base 28808","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003e28808, Wilton Tradesman 8in Round Channel Vise with Swivel Base\u003c\/p\u003e\n\u003cp\u003eThe Wilton® bench Vise family has improved over the years, but has always maintained the same high quality and integrity since 1941.  Wilton is now pleased to introduce a new and improved version of our number one selling vise – the Tradesman Bullet vise.\u003c\/p\u003e\n\u003cp\u003eUnlike most vises that have a fixed center nut the Tradesman spindle nut is anchored at the rear. This decreases backlash and increases clamping force while significantly increasing product life. The round channel design allows for a completely enclosed spindle assembly, keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the Tradesman vise is equipped with replaceable serrated jaw inserts, pipe jaws and a machined striking anvil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully Sealed one-piece Spindle Nut Assembly\u003c\/li\u003e\n\u003cli\u003eRedesigned Spindle Assembly with Replaceable Tommy Bar\u003c\/li\u003e\n\u003cli\u003ePrecision Machined Slide Bar\u003c\/li\u003e\n\u003cli\u003eMachined Steel Serrated Jaws with Black Phosphate Coating\u003c\/li\u003e\n\u003cli\u003e60,000 psi Ductile Iron Body, Movable Jaw \u0026amp; Base\u003c\/li\u003e\n\u003cli\u003eOversized Anvil\u003c\/li\u003e\n\u003cli\u003e360° Swivel Base with Double Lockdowns\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJaw Width (In.) 8\u003c\/li\u003e\n\u003cli\u003eOpening Capacity Max (In.) 7\u003c\/li\u003e\n\u003cli\u003eThroat Depth (In.) 4-3\/4\u003c\/li\u003e\n\u003cli\u003ePipe Jaw Capacity (In.) 1\/8 - 3-1\/2\u003c\/li\u003e\n\u003cli\u003eType of Base 360 Degree Swivel\u003c\/li\u003e\n\u003cli\u003eJaw Depth (In.) 5\/8\u003c\/li\u003e\n\u003cli\u003eJaw Height (In.) 1\u003c\/li\u003e\n\u003cli\u003ePipe Jaw # 2908050\u003c\/li\u003e\n\u003cli\u003eSerrated Jaw Inserts # 2908100\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWilton Lifetime Warranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWilton warrants every product they sell against manufacturers’ defects. If one of Wilton tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/bisjettools.com\/banners\/jet\/warranty\/wilton_lifetime.png\" alt=\"\" width=\"80\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ciframe width=\"600\" height=\"355\" src=\"https:\/\/www.youtube.com\/embed\/9VXhxpuhgjc\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":44153319784541,"sku":"JT28808","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/files\/28808_alt5.jpg?v=1769410099"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/1342\/3453\/collections\/10225_main_1705414601.jpg?v=1770269034","url":"https:\/\/beavertools.com\/collections\/industries-metalworking-material-holding-vises-bench-vises-usa-bullet.oembed","provider":"Beaver Industrial Supply","version":"1.0","type":"link"}