12 Volt, 15 Volt, 18 Volt its time to break with conventional thinking.
With the latest Festool T+3 Series Cordless Drills, which no longer belong to a voltage class but rather in a class that is completely redefined by the interplay of brains and brawn.
With a motor design that guarantees extra performance. Longlasting battery packs with modern lithium-ion technology. And a compact design as well as handling that makes the available power comfortable and efficient to use, even over long periods of time.
It feels as if that, whatever the job, there is still more power available whether screwdriving small or large screws or drilling small or large holes in soft wood, hardwood, or metal.
The proof can be found when screwdriving. Thats why the latest T 12+3 and T 15+3 cordless drills are outfitted with a real power plant the patented EC-TEC motor. This motor not only runs without using carbon brushes and is therefore free of wear, but knows how to convert battery energy into performance almost without any loss thanks to intelligent motor management.
The result: more screwdriving performance. A controlled use of power. And a unique torque that puts the latest T+3 Series in a performance range that normally belongs to the next higher voltage class. The usefulness of this power is increased by intelligent functions, such as the one that stores the torque setting when switching between drilling and screwdriving. Because the torque setting is stored, you can interrupt your screwdriving work to drill a hole under full power and then immediately switch back into the screwdriving mode. Without ever having to reset the torque.
Comes With:
2 Li-ion 2.6 Ah battery packs (495479)
TRC 3 charger (495227)
Centrotec chuck (492135) with starter set including 4mm wood drill, Phillips 2 bit and Centrotec bit holder/adapter
FastFix (quick connect) straight chuck (490698)
FastFix (quick connect) right angle (490293) and eccentric (490294) chucks
In Systainer 1 (445433)
Special Features:
EC-TEC motors run without carbon brushes, and are therefore free of wear. You will be impressed by the level of efficiency, which has been increased once again, and the amazing power.
Electronic motor management guarantees the longest service life microprocessors monitor and control the temperature, voltage, and current consumption of the motor, electronics and battery.
The QuickSwitch really saves time the torque that is set for screwdriving is stored, even if there is drilling at maximum torque in the meantime.
The light, compact design, the slender Softgrip handle and the perfectly located center of gravity ensure that work goes easily and smoothly.
The practical bit holder provides space for up to four bits magnetically secured against falling out.
The FastFix interface is the key to the CENTROTEC quick change system and all FastFix chucks. All other types of tools can be used with the standard, keyless 1/2" chuck.
Specs:
Battery voltage:10.8 V
Idling speed, 1st gear/2nd gear:0-450/0-1500 min-1
Drilling diameter, wood/steel:1", 25 / 9/16", 14 mm
Torque adjustment:4.4 - 70.8 in lbs (0,5 - 8 Nm)
Max. torque, wood/steel:220/265.5 in lbs (25/30 Nm)
Chuck range:1/2" (13 mm)
Battery capacity:2.6 Ah
Charging time Li Ion:70 min
Weight with Li Ion:3 lbs. 1.4 oz.
|
